{"product_id":"m-a-ford-30009450-carbide-circuit-board-drill-2-4mm","title":"M.a. Ford. 30009450 Carbide Circuit Board Drill 2.4mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 30009450 is a solid carbide circuit board drill bit engineered for precision drilling in printed circuit board fabrication and electronics manufacturing applications. Ground to a 118-degree drill point angle with a fast spiral flute design and a 35-degree helix angle, this bit evacuates chips efficiently while maintaining hole accuracy in tight-tolerance work. The 2.4mm cutting diameter and matching 2.4mm shank diameter are ground to a tolerance of -0.013 to +0.000 mm, ensuring consistent, repeatable hole geometry. With a flute length of 16mm and an overall length of 38mm, the bit provides adequate depth capacity for standard PCB stack drilling. It is sold and packaged as a single unit.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for drilling cast iron, non-ferrous metals, and steel in addition to its primary circuit board applications. The fast spiral geometry and right-hand cutting direction make it appropriate for use in CNC drilling machines and precision drill presses where controlled feed rates and spindle speeds are maintained. Two flutes provide clearance and chip flow in shallow-depth drilling cycles common to electronics and light fabrication environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for wear resistance and rigidity in precision drilling\u003c\/li\u003e\n  \u003cli\u003eFast spiral flute design with 35-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003e118-degree drill point angle for clean entry in PCB and metal substrates\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance of -0.013 to +0.000 mm for consistent, close-tolerance hole sizing\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, 2-flute design compatible with standard CNC and manual drill setups\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for applications where coating buildup is a concern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use drill bit for precision CNC drilling machines and drill presses accepting a 2.4mm straight shank. Compatible with cast iron, non-ferrous metal, and steel workpieces per manufacturer specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this drill bit should be performed by machinists or technicians familiar with CNC or precision drill press operation. Ensure the machine spindle and collet are fully powered down and locked out before loading or changing bits. Verify collet size matches the 2.4mm shank diameter exactly to prevent runout and premature bit breakage. Do not exceed recommended feed rates and spindle speeds for the workpiece material and bit diameter.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2.40 mm (0.0945 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 2.40 mm (0.0945 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 16.00 mm (0.6299 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 38.00 mm (approximately 1.496 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Fast\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.013 to +0.000 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 300\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0043 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30009450\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51727169257778,"sku":"30009450","price":30.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a7edb8b8d904181107cccd2cd0837a09.jpg?v=1788674268","url":"https:\/\/voomisupply.com\/products\/m-a-ford-30009450-carbide-circuit-board-drill-2-4mm","provider":"Voomi Supply","version":"1.0","type":"link"}