{"product_id":"m-a-ford-2xdsr5000a-jobber-drill-1-2-in-solid-carbide","title":"M.a. Ford 2XDSR5000A Jobber Drill 1\/2 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 2XDSR5000A is a solid carbide jobber-length drill bit engineered for high-performance cutting in demanding metalworking applications. It features a 142-degree split point, a 1\/2 inch diameter, and an ALtima titanium nitride (ALtiN) coating that extends tool life and reduces heat buildup at the cutting edge. The overall length is 4.75 inches, with a 2.83-inch flute length and a straight cylindrical shank. Two regular spiral flutes provide efficient chip evacuation. This drill is intended for professional machinists and tool-room technicians working with production-grade CNC or manual drilling equipment.\u003c\/p\u003e\n\u003cp\u003eThe 2XDSR5000A is designed for drilling steel, stainless steel, and high-temperature alloys — workpiece material codes H, M, and S. The 5xD flute-to-diameter ratio and ALtiN coating make it well suited for interrupted cuts and high-feed-rate applications where standard HSS tooling would wear prematurely. Typical install scenarios include aerospace component machining, general metalworking shops, and job-shop environments drilling structural or tool steels. Maximum recommended drilling depth is 2.26 inches. Coolant-through is not supported on this series.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard-metal drilling\u003c\/li\u003e\n  \u003cli\u003eALtiN (ALtima) coating reduces friction and extends tool life in steel and high-temp alloys\u003c\/li\u003e\n  \u003cli\u003e142-degree point angle promotes self-centering and reduces thrust force on entry\u003c\/li\u003e\n  \u003cli\u003eRegular spiral, 2-flute geometry supports efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight 1\/2 inch shank fits standard drill chucks and collet holders\u003c\/li\u003e\n  \u003cli\u003eManufactured under ISO 9001:2015 certified quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/2 inch drill chucks, ER collet systems, and compatible CNC machining center toolholders. Primary workpiece materials are steel, stainless steel, and high-temperature alloys (material codes H, M, S). Part of the M.A. FORD Series 2XDSR family covering the 0.5000 to 0.6500 decimal inch drill bit size range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists familiar with cutting tool handling and machine tool operation. Ensure the spindle is fully stopped and the machine is de-energized or in a safe lockout state before changing tooling. Verify shank-to-holder runout is within tolerance before drilling to protect the carbide from shock fracture. Solid carbide tooling is brittle and should not be dropped or used to pry material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.5000 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 142 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ALtiN (ALtima Titanium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.75 inches (4-3\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.83 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 2.26 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5000 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.00000 to -0.00071 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, High-Temp Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2XDSR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3536 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 9001:2015 Certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2XDSR5000A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51748564959538,"sku":"2XDSR5000A","price":389.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6a05eedaa50b8b98dd13ea51f36f9919_fbdd76dc-d104-4f7e-bd1c-d201f2952b89.jpg?v=1788895258","url":"https:\/\/voomisupply.com\/products\/m-a-ford-2xdsr5000a-jobber-drill-1-2-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}