{"product_id":"m-a-ford-2xdcs1299a-jobber-drill-3-30mm-solid-carbide","title":"M.a. Ford. 2XDCS1299A Jobber Drill 3.30mm Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 2XDCS1299A is a solid carbide jobber-length drill bit designed for high-performance drilling in demanding materials. It carries a 3.30 mm (0.1299 inch) diameter, a 142-degree split point, and an ALtima plus Titanium Nitride (TiN) coating that extends tool life and reduces heat buildup at the cutting edge. The overall length is 63.00 mm (2.48 inches), with a 22.00 mm (0.87 inch) flute length and a 4.00 mm (0.16 inch) straight-cylindrical shank. The right-hand spiral flute geometry promotes efficient chip evacuation. Coolant-through capability makes this drill suitable for deep-hole operations where heat management is critical. It is intended for use by machinists and tooling professionals in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThis drill is optimized for primary workpiece materials classified under temperature-resistant alloys, as indicated by material codes H, M, and S. Typical applications include drilling titanium alloys, stainless steels, and other high-strength materials where standard high-speed steel tooling falls short. The 3xD flute-to-diameter ratio and maximum drilling depth of 18.00 mm (0.71 inch) make it well suited for through-hole and blind-hole operations in aerospace, medical, and energy-sector part production where close-tolerance results are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003eALtima plus TiN coating reduces friction and extends tool life in temperature-resistant alloys\u003c\/li\u003e\n  \u003cli\u003e142-degree point angle improves self-centering and reduces thrust force at entry\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design supports chip flushing and heat control during deep-hole drilling\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard collet chucks and drill sleeves without adapters\u003c\/li\u003e\n  \u003cli\u003eManufactured to DIN 6537 K and produced under ISO 9001:2015 certified conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style tooling solution for CNC machining centers, drill presses, and manual machines accepting a 4.00 mm straight-cylindrical shank in the 3.00 mm to 4.00 mm drill diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by a qualified machinist familiar with carbide tooling requirements. Secure the shank fully in a collet or chuck before operation and verify runout is within acceptable limits, as carbide is brittle and sensitive to lateral loading. Engage coolant-through supply before the drill contacts the workpiece to prevent thermal shock to the carbide substrate. Do not use this drill to hand-feed at excessive rates; carbide tooling requires consistent, controlled feed and speed parameters appropriate to the workpiece material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3.30 mm (0.1299 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 142 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ALtima plus TiN (Titanium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 63.00 mm (2.48 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 22.00 mm (0.87 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 4.00 mm (0.16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 18.00 mm (0.71 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Temperature-Resistant Alloys (H, M, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.012 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2XDCS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN 6537 K; ISO 9001:2015 Certified\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0196 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2XDCS1299A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51739898052914,"sku":"2XDCS1299A","price":131.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b26fc23f834ec7e0396e60ce5a8e2587_fdda62f9-2325-4c24-bd20-159cb6e14946.jpg?v=1788820177","url":"https:\/\/voomisupply.com\/products\/m-a-ford-2xdcs1299a-jobber-drill-3-30mm-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}