{"product_id":"m-a-ford-2xdcr4606a-jobber-drill-11-70mm-solid-carbide","title":"M.a. Ford 2XDCR4606A Jobber Drill 11.70mm Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 2XDCR4606A is a solid carbide jobber-length drill bit designed for high-performance drilling in demanding materials including steel, stainless steel, and high-temperature alloys. The bit features a 142-degree split-point geometry that reduces walking and cuts through hard substrates with minimal thrust. At 11.70 mm (0.4606 inches) in diameter with a straight cylindrical shank of 12 mm, it runs in standard drill chucks and tool holders without adapters. The ALtima AlTiN coating provides thermal resistance and wear protection, extending tool life in high-heat cutting environments. Coolant-through capability supports high-speed drilling cycles where through-spindle coolant is available.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for CNC machining centers, vertical mills, and production drilling operations where tight tolerances and consistent hole quality are required. The 5xD flute-to-diameter ratio and 66 mm flute length allow effective chip evacuation in deeper bores up to a maximum drilling depth of 53 mm. It is appropriate for job shops, aerospace component manufacturing, and precision metalworking operations where ISO and DIN-compliant tooling is specified. Right-hand cutting, regular spiral flutes, and a straight shank make this a direct drop-in for most standard tooling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and heat resistance in hard-material drilling\u003c\/li\u003e\n  \u003cli\u003eALtima AlTiN proprietary coating for extended wear life in high-temperature cutting conditions\u003c\/li\u003e\n  \u003cli\u003e142-degree point angle reduces entry thrust and minimizes drill walk on hardened surfaces\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design compatible with through-spindle coolant delivery systems\u003c\/li\u003e\n  \u003cli\u003e5xD flute-to-diameter ratio supports efficient chip removal in deeper holes\u003c\/li\u003e\n  \u003cli\u003eMeets DIN 6537 K standard and manufactured under ISO 9001:2015 certified conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for drilling steel, stainless steel, and high-temperature alloys. Compatible with standard straight-shank tool holders and drill chucks accepting a 12 mm shank. Part of the M.A. FORD Series 2XDCR high-performance carbide drill line targeting workpiece material codes H, M, and S.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tooling is installed and operated by machinists and CNC technicians. Ensure the machine spindle is fully stopped and the tool is securely clamped in the holder before beginning any setup. Confirm that coolant lines are connected and flow is verified before engaging through-spindle coolant mode. Observe recommended speeds and feeds for the specific workpiece material to avoid premature edge wear or tool fracture.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 11.70 mm (0.4606 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 142 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ALtima AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 120 mm (4.7244 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 66 mm (2.5984 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 53 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 12 mm (0.4724 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.018 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, High-Temp Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2XDCR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN 6537 K, ISO 9001:2015 Certified\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.32 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2XDCR4606A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51739641479474,"sku":"2XDCR4606A","price":406.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/141dc0bd3238054c08783502a6661580_9c627f1d-590d-4292-928d-69af2665e81b.jpg?v=1788817258","url":"https:\/\/voomisupply.com\/products\/m-a-ford-2xdcr4606a-jobber-drill-11-70mm-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}