{"product_id":"m-a-ford-2xdcl3740a-taper-length-drill-bit-9-5mm-carbide","title":"M.a. Ford 2XDCL3740A Taper Length Drill Bit 9.5mm Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 2XDCL3740A is a taper length drill bit engineered for high-performance drilling in demanding metalworking applications. Built from solid carbide and coated for extended tool life, this bit features a 142-degree point angle optimized for accurate entry and reduced thrust force. It measures 9.5 mm (0.3740 inches) in diameter with an 85 mm flute length and a 136 mm overall length. Coolant-through capability delivers cutting fluid directly to the tip, improving chip evacuation and heat management during deep-hole operations. This bit is suited for machinists and tooling professionals working in production or job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThe 2XDCL3740A is designed for drilling cast iron, titanium, carbon steel, steel, and tool steel. Its 7xD flute-length-to-diameter ratio and maximum drilling depth of 68 mm make it a fit for taper-length hole requirements in structural components, dies, molds, and machined parts. The straight shank with a 10 mm shank diameter and 51 mm shank length seats securely in standard drill chucks and collet holders used in CNC machining centers and manual drill presses.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e142-degree point angle reduces walking and improves entry accuracy\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design channels fluid to the cutting edge for thermal control and chip removal\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute promotes efficient chip evacuation in through-hole and blind-hole applications\u003c\/li\u003e\n  \u003cli\u003eStraight shank compatible with standard drill chucks and collet holders\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance of +0.000 to -0.015 mm ensures consistent hole sizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and drill presses equipped with standard straight-shank toolholders or collet chucks accepting a 10 mm shank. Rated for cast iron, titanium, carbon steel, steel, and tool steel workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or tooling technicians familiar with cutting tool setup and machine operation. Ensure the machine spindle is fully stopped and the tool is properly torqued into the holder before operation. Verify coolant-through supply is active and at appropriate flow before drilling to protect the cutting edge and workpiece. Inspect the drill for chipping or wear before each use, as carbide tooling is brittle and should not be forced into interrupted cuts beyond its rated application.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 9.5 mm (0.3740 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 142 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 85 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 136 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 68 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 10 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 51 mm (2.0078 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 7xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.015 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Cast Iron, Titanium, Carbon Steel, Steel, Tool Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2XDCL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2314 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2XDCL3740A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51743073075506,"sku":"2XDCL3740A","price":386.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2e69bdc1fbe9bb0a26bdb72502fb20a0_7c0274d7-4e1c-4b0e-b405-e4d7a41c2139.jpg?v=1788842251","url":"https:\/\/voomisupply.com\/products\/m-a-ford-2xdcl3740a-taper-length-drill-bit-9-5mm-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}