{"product_id":"m-a-ford-2xdcl2283a-taper-length-drill-bit-5-8-mm-carbide","title":"M.a. Ford 2XDCL2283A Taper Length Drill Bit 5.8 Mm Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 2XDCL2283A is a solid carbide taper length drill bit engineered for precision drilling in demanding industrial and machining applications. Measuring 5.8 mm in diameter (0.2283 decimal inch) with a 142-degree split point angle, this bit delivers accurate, self-centering entry with reduced thrust. The spiral flute geometry and right-hand cut produce clean chip evacuation, while the coated finish extends tool life in abrasive materials. Coolant-through capability supports high-speed operation in production environments. This bit is used by machinists, toolroom technicians, and precision fabricators working on tight-tolerance bore applications.\u003c\/p\u003e\n\u003cp\u003eThe 2XDCL2283A is rated for use in cast iron, titanium, carbon steel, steel, and tool steel. With a 7xD flute-length-to-diameter ratio, it is suited for deeper hole applications where a jobber-length bit would fall short. The 51 mm flute length and 100 mm overall length (OAL) make it appropriate for taper-length reach requirements in CNC machining centers, drill presses, and manual mills where straight-shank tooling is specified. The 6.00 mm straight shank seats directly into standard collets and chucks without an adapter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e142-degree drill point angle for self-centering starts and reduced walking on entry\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design supports high-feed, high-speed drilling with internal chip flushing\u003c\/li\u003e\n  \u003cli\u003eCoated finish extends cutting edge life across repeated drilling cycles\u003c\/li\u003e\n  \u003cli\u003e7xD flute-length-to-diameter ratio enables deeper holes compared to standard jobber-length bits\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute geometry promotes efficient chip evacuation and clean bore walls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers, drill presses, and manual milling machines that accept straight-shank tooling with a 6.00 mm shank diameter. Rated for drilling cast iron, titanium, carbon steel, steel, and tool steel per Series 2XDCL application data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed with the machine fully powered down and locked out per applicable lockout\/tagout procedures. Seat the straight shank fully and evenly in a collet or drill chuck rated for the shank diameter before tightening. Solid carbide tooling is brittle — avoid side-loading or using this bit to ream or enlarge existing holes outside its designed path. Verify coolant-through lines are clear and flowing at the correct pressure before initiating production runs.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5.8 mm (0.2283 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 142 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 51 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 100 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 49 mm (1.929 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 41 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 7xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight, Non-Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.012 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Cast Iron, Titanium, Carbon Steel, Steel, Tool Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2XDCL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0672 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2XDCL2283A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51746397716786,"sku":"2XDCL2283A","price":205.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2e69bdc1fbe9bb0a26bdb72502fb20a0_c29a65b6-b84e-44f0-afc0-d79a8d36ace2.jpg?v=1788869529","url":"https:\/\/voomisupply.com\/products\/m-a-ford-2xdcl2283a-taper-length-drill-bit-5-8-mm-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}