{"product_id":"m-a-ford-27220900-chucking-reamer-0-2090-in-solid-carbide","title":"M.a. Ford 27220900 Chucking Reamer 0.2090 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD 27220900 is a solid carbide chucking reamer designed to finish-ream precision holes to tight tolerances in metalworking and machining applications. Built to a 0.2090 inch diameter (Wire Size 4), it holds a reamer diameter tolerance of +0.0001 to +0.0003 inches, making it well suited for applications where hole geometry and surface finish are critical. The straight flute geometry and right-hand cutting direction provide clean, consistent material removal in through-holes and blind holes alike. Machinists and tool-and-die professionals install this reamer in CNC machining centers, knee mills, and drill presses using a standard chuck or collet setup.\u003c\/p\u003e\u003cp\u003eThis reamer is used in precision machining environments where a reamed hole must meet close dimensional tolerances for dowel pins, bushings, bearings, or press-fit components. With a 3.0 inch overall length and a 1 inch flute length, it is sized for shallow finishing passes in ferrous and non-ferrous materials. Its solid carbide construction provides the rigidity and wear resistance needed for production runs and hard materials. It is appropriate for both job-shop and production-floor use where repeatable hole sizing is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.2090 inch diameter (Wire Size 4) with a tolerance of +0.0001 to +0.0003 inches for precision fitment\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for superior rigidity and wear resistance compared to HSS alternatives\u003c\/li\u003e\n\u003cli\u003eStraight flute design with right-hand cutting and right-hand spiral direction\u003c\/li\u003e\n\u003cli\u003eStraight shank for direct chucking in collets, Jacobs chucks, or ER toolholders\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for use with cutting fluid across a range of workpiece materials\u003c\/li\u003e\n\u003cli\u003e4-flute configuration provides balanced cutting action and good surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style precision chucking reamer for use in standard straight-shank toolholders and chucks compatible with a 0.2090 inch diameter reamer. No specific machine or system compatibility data was provided by the manufacturer for this SKU.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or trained toolroom operator should install this reamer in a properly aligned spindle to avoid runout-induced oversize holes. Always secure the straight shank fully in the chuck or collet before operation, and verify spindle runout with a dial indicator when tolerance is critical. Apply appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish. Do not use this reamer as a drill — it is a finishing tool and must follow a drilled or bored hole that is already close to final diameter.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.2090 inches (Wire Size 4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Range\u003c\/strong\u003e: 0.2000 to 0.2499 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0001 \/ +0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 272\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27220900\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51730028069170,"sku":"27220900","price":87.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4fd1a17d53a5d9cacf9fb6e80ea09f2e.jpg?v=1788710444","url":"https:\/\/voomisupply.com\/products\/m-a-ford-27220900-chucking-reamer-0-2090-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}