{"product_id":"m-a-ford-27218850-chucking-reamer-0-1885-in-solid-carbide","title":"M.a. Ford 27218850 Chucking Reamer 0.1885 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 27218850 is a solid carbide chucking reamer designed for precision hole finishing in metalworking and machining applications. With a reamer diameter of 0.1885 inches and a diameter tolerance of +0.0001 to +0.0003 inches, this tool produces accurate, repeatable bores in a single pass. The straight flute geometry and right-hand cutting direction make it well-suited for through-hole reaming in most common workpiece materials. At 2.75 inches overall length with a 0.875-inch flute length, it fits standard drill press and CNC machining center setups. Machinists, tool-and-die makers, and maintenance technicians rely on this type of reamer for finishing drilled holes to close-tolerance specifications.\u003c\/p\u003e\n\u003cp\u003eThe 27218850 is used in general machining environments where hole diameter consistency and surface finish are critical. Its straight shank mounts directly into collet chucks, drill chucks, or floating reamer holders found on manual lathes, drill presses, and CNC machining centers. The 4-flute configuration balances material removal with hole finish quality across a range of ferrous and non-ferrous materials. This reamer is uncoated and does not include coolant-through capability, making it appropriate for bench machining or lower-speed applications where flood or mist coolant is applied externally.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in precision reaming operations\u003c\/li\u003e\n  \u003cli\u003e0.1885-inch reamer diameter with a tight tolerance of +0.0001 to +0.0003 inches for close-tolerance hole finishing\u003c\/li\u003e\n  \u003cli\u003e4-flute straight configuration supports consistent chip evacuation in through-hole applications\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand spiral direction for standard feed-and-speed setups\u003c\/li\u003e\n  \u003cli\u003eStraight shank for direct mounting in collet chucks or drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for use with external flood or mist coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a Series 272 chucking reamer for use in drill presses, lathes, and CNC machining centers equipped with standard collet or drill chuck toolholding; fits the 0.1500 to 0.1999-inch reamer diameter range category.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by a qualified machinist familiar with reaming feeds, speeds, and workholding practices. Ensure the machine spindle is fully stopped and the workpiece is securely clamped before mounting or removing the reamer. Use appropriate cutting fluid applied externally, as this tool does not support coolant-through delivery. Do not exceed manufacturer-recommended feeds and speeds for solid carbide tooling, and inspect the cutting edges for wear or chipping before each use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.1885 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 272\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27218850\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51746632335666,"sku":"27218850","price":83.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e7472d20bd84ceb9539fc5aace1e83b1.jpg?v=1788871960","url":"https:\/\/voomisupply.com\/products\/m-a-ford-27218850-chucking-reamer-0-1885-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}