{"product_id":"m-a-ford-27216600-chucking-reamer-0-1660-in-solid-carbide","title":"M.a. Ford 27216600 Chucking Reamer 0.1660 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD 27216600 is a solid carbide chucking reamer designed to finish-ream precision holes to tight tolerances in metal workpieces. Built to wire size 19, it cuts a nominal diameter of 0.1660 inches with a tolerance of +0.0001 to +0.0003 inches, making it suitable for applications where bore accuracy and surface finish are critical. The straight flute geometry and right-hand cutting direction provide clean, consistent stock removal. With an overall length of 2.75 inches and a flute length of 0.875 inches, this reamer fits standard chuck-style toolholders used on drill presses, CNC machining centers, and manual lathes.\u003c\/p\u003e\u003cp\u003eThis reamer is suited for production and maintenance machining environments where holes must meet close dimensional tolerances. The straight shank allows direct clamping in drill chucks or collet holders without special adapters. Four flutes distribute cutting load evenly, reducing chatter and improving finish quality. It is appropriate for use in ferrous and non-ferrous materials where solid carbide tooling is preferred for hardness and wear resistance. The uncoated finish is standard for applications where coating is not required or where re-sharpening is anticipated.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and extended tool life in hard or abrasive materials\u003c\/li\u003e\n\u003cli\u003eWire size 19 nominal diameter of 0.1660 inches with +0.0001 to +0.0003 inch tolerance\u003c\/li\u003e\n\u003cli\u003eFour straight flutes with right-hand cutting direction for smooth, consistent bore finishing\u003c\/li\u003e\n\u003cli\u003eStraight shank compatible with standard drill chucks and collet-style toolholders\u003c\/li\u003e\n\u003cli\u003eOverall length of 2.75 inches with a 0.875 inch flute length for short-reach applications\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for standard machining conditions and re-sharpening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style precision reamer for use in standard chuck and collet toolholding systems on drill presses, manual lathes, and CNC machining centers where a straight shank reamer in the 0.1500 to 0.1999 inch diameter range is specified.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool should be installed and operated by qualified machinists familiar with reaming procedures and machine tooling. Secure the straight shank firmly in a properly sized chuck or collet before operation, and verify that the machine spindle is powered down and at a complete stop before tooling changes. Use appropriate cutting fluid for the workpiece material to extend tool life and improve finish quality. Do not exceed the recommended feed and speed parameters for solid carbide tooling in the material being machined.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Wire Size)\u003c\/strong\u003e: 19\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Decimal Inch)\u003c\/strong\u003e: 0.1660 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter Range\u003c\/strong\u003e: 0.1500 to 0.1999 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 272\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27216600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51754890887474,"sku":"27216600","price":75.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/33a51f41eee92bcbaee7e1e8e51cdd62.jpg?v=1788949558","url":"https:\/\/voomisupply.com\/products\/m-a-ford-27216600-chucking-reamer-0-1660-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}