{"product_id":"m-a-ford-27215700-chucking-reamer-size-22-solid-carbide","title":"M.a. Ford. 27215700 Chucking Reamer Size 22 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 27215700 is a solid carbide chucking reamer designed for precision hole finishing in metalworking applications. It carries a wire gauge designation of No. 22, corresponding to a decimal diameter of 0.1570 inches, and holds a reamer diameter tolerance of +0.0001 to +0.0003 inches for tight, consistent sizing. The reamer features four straight flutes with a right-hand cutting direction, an overall length of 2.5 inches, and a flute length of 0.75 inches. The straight shank mounts directly in a drill chuck or collet holder. This tool is intended for use by machinists and toolroom technicians requiring repeatable bore accuracy in production or maintenance environments.\u003c\/p\u003e\u003cp\u003eThis chucking reamer is suited for finishing pre-drilled or bored holes to close dimensional tolerances in ferrous and non-ferrous metals. The straight flute geometry works well in through-hole and short blind-hole applications where chip evacuation is manageable. The uncoated solid carbide construction provides the rigidity and wear resistance needed for accurate sizing cuts at typical reaming feed rates and speeds. It is commonly used in job shops, tool rooms, and light manufacturing settings where wire-gauge hole sizing is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and extended tool life in precision reaming\u003c\/li\u003e\n\u003cli\u003eWire size No. 22 with a decimal diameter of 0.1570 inches\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance of +0.0001 to +0.0003 inches for consistent hole sizing\u003c\/li\u003e\n\u003cli\u003eFour straight flutes with right-hand cutting direction\u003c\/li\u003e\n\u003cli\u003eStraight shank for direct chuck or collet mounting\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for a broad range of metals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style precision chucking reamer for use in standard drill chucks and collet systems accepting a straight shank in the 0.1500 to 0.1999 inch diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by a qualified machinist familiar with reaming operations. Secure the straight shank firmly in a properly sized collet or drill chuck before operation, and ensure the spindle is fully stopped before tooling changes. Apply appropriate cutting fluid for the workpiece material to improve finish quality and tool life. Follow machine manufacturer feed and speed guidelines for carbide reamers at this diameter range.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Wire Size)\u003c\/strong\u003e: No. 22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Decimal Inch)\u003c\/strong\u003e: 0.1570 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter Range\u003c\/strong\u003e: 0.1500 to 0.1999 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 272\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27215700\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51749891473714,"sku":"27215700","price":72.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e210482e9087cbd05cdc22a9e557e4a3.jpg?v=1788911789","url":"https:\/\/voomisupply.com\/products\/m-a-ford-27215700-chucking-reamer-size-22-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}