{"product_id":"m-a-ford-27211810-chucking-reamer-3mm-solid-carbide","title":"M.a. Ford. 27211810 Chucking Reamer 3mm Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 27211810 is a solid carbide chucking reamer designed to finish-ream precision holes to a 3 mm diameter. Solid carbide construction delivers the rigidity and wear resistance needed for tight-tolerance work in hardened or abrasive materials. The straight flute geometry suits reaming in through-holes where chip evacuation is straightforward. With a 2-1\/4 inch overall length and a 5\/8 inch flute length, this is a compact tool suited for short-reach applications. The diameter tolerance of +0.004\/+0.008 mm supports consistent hole sizing across production runs. This reamer is installed and operated by machinists and tool room professionals working on CNC mills, drill presses, or manual lathes.\u003c\/p\u003e\n\u003cp\u003eThis chucking reamer is used in metalworking applications where holes must be sized and finished to close dimensional tolerances. The straight shank allows direct mounting in standard drill chucks, collet chucks, or floating reamer holders. Typical applications include finish-reaming dowel pin holes, bearing bores, and precision fit holes in ferrous and non-ferrous materials. The right-hand cutting direction is standard for conventional spindle rotation. No coolant-through capability is present, so external coolant or cutting fluid application is recommended when reaming steel or other tough alloys.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and extended tool life in abrasive or hardened materials\u003c\/li\u003e\n  \u003cli\u003e3 mm reamer diameter with a tolerance of +0.004\/+0.008 mm for precise hole sizing\u003c\/li\u003e\n  \u003cli\u003e4-flute straight design for clean finish on through-hole applications\u003c\/li\u003e\n  \u003cli\u003eStraight shank compatible with standard drill chucks and collet holders\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand spiral for use with conventional spindle rotation\u003c\/li\u003e\n  \u003cli\u003eUncoated carbide substrate suitable for a wide range of workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style chucking reamer for use in standard drill chucks, ER collet systems, and floating reamer holders accepting straight-shank tools at 3 mm diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by qualified machinists familiar with reaming procedures. Power down and lock out the machine spindle before mounting or removing the reamer from the holder. Ensure the shank is fully seated and the chuck or collet is tightened to the holder manufacturer's specified torque range before operation. Apply appropriate cutting fluid externally during the reaming operation to control heat and extend tool life, as this tool does not have coolant-through capability.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 3.00 mm (0.1181 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/4 inches (64.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5\/8 inches (16.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.004\/+0.008 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 272\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27211810\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51731527729458,"sku":"27211810","price":58.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6c90dfb35f7c2de6e34e6ee11f481c2b.jpg?v=1788732170","url":"https:\/\/voomisupply.com\/products\/m-a-ford-27211810-chucking-reamer-3mm-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}