{"product_id":"m-a-ford-27211300-chucking-reamer-wire-33-solid-carbide","title":"M.a. Ford 27211300 Chucking Reamer Wire 33 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 27211300 is a solid carbide chucking reamer designed for precision hole finishing in machine-shop and production environments. Built to wire size 33, it produces a finished bore diameter of 0.1130 inches with a tight tolerance of +0.0001\/+0.0003 inches, making it suitable for close-tolerance fits and dowel or pin bores where accuracy is critical. The straight flute geometry provides clean, consistent material removal in through-hole applications, and the right-hand cutting direction pairs with standard spindle rotation. At 2.25 inches overall length with a 0.625-inch flute, this is a compact tool sized for short-reach finish reaming on the bench, knee mill, or CNC machining center.\u003c\/p\u003e\n\u003cp\u003eThis reamer is intended for use in metalworking applications where hole size and finish are held to close tolerances. The straight shank mounts directly in a drill chuck, collet, or floating reamer holder. Typical applications include production reaming of small-diameter bores in steel, aluminum, brass, and other machinable alloys. The solid carbide construction offers greater rigidity and wear resistance than HSS at this small diameter, supporting higher feed rates and longer tool life in abrasive or harder workpiece materials. It ships individually and is suited for job-shop or production use where repeatable hole quality is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWire size 33 diameter of 0.1130 inches with tolerance of +0.0001\/+0.0003 inches for close-tolerance bore finishing\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity, wear resistance, and dimensional stability at small diameters\u003c\/li\u003e\n  \u003cli\u003eStraight flute geometry with right-hand cutting direction for clean material removal in through-hole applications\u003c\/li\u003e\n  \u003cli\u003e4-flute design balances cutting load and surface finish quality\u003c\/li\u003e\n  \u003cli\u003eStraight shank for direct mounting in drill chucks, collet holders, or floating reamer holders\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for use with standard cutting fluids across a range of machinable alloys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style machine reamer for use in standard drill chucks, precision collets, and floating reamer holders on knee mills, drill presses, lathes, and CNC machining centers accepting a straight-shank tool at this diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eChucking reamers should be installed and operated by qualified machinists familiar with cutting tool setup and machine operation. Ensure the spindle and workpiece are fully stopped and power is off before installing or removing the tool from the holder. Use a floating holder where possible to prevent side loading on the carbide shank, which is brittle and susceptible to breakage under lateral force. Apply appropriate cutting fluid for the workpiece material to control heat and extend tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Wire Size)\u003c\/strong\u003e: 33\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Decimal Inch)\u003c\/strong\u003e: 0.1130 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter Range\u003c\/strong\u003e: 0.1000 - 0.1499 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter Tolerance\u003c\/strong\u003e: +0.0001\/+0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 272\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27211300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51730473451826,"sku":"27211300","price":62.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e3e60cb255fe5cac7828d79737491383.jpg?v=1788718077","url":"https:\/\/voomisupply.com\/products\/m-a-ford-27211300-chucking-reamer-wire-33-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}