{"product_id":"m-a-ford-20073440-carbide-die-drill-bit-47-64-in","title":"M.a. Ford. 20073440 Carbide Die Drill Bit 47\/64 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 20073440 is a solid carbide, straight-flute die drill bit designed for high-precision holemaking in demanding materials. Built to Series 200 standards and compliant with DIN specifications, it features a 135-degree split point and web-thinned geometry that reduces entry force and improves centering accuracy. The bit carries a diameter tolerance of +0.0000 to -0.0005 inches, making it appropriate for tight-tolerance die and mold work. With a 4-inch overall length and 1.5-inch flute length, this uncoated carbide bit is suited for machinists and toolroom technicians working in production or job-shop environments.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for holemaking in a wide range of workpiece materials, including cast iron, non-ferrous metals, stainless steel, alloy steel, austenitic stainless steel, hardened materials, high-temperature alloys, titanium, ceramic, and glass. Its straight-flute configuration and right-hand cutting direction are well suited to controlled drilling operations in die sets, fixtures, and precision components where chip control and hole quality are critical priorities.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces walking and lowers thrust force at entry\u003c\/li\u003e\n\u003cli\u003eWeb-thinned geometry improves chip clearance and cutting efficiency\u003c\/li\u003e\n\u003cli\u003eStraight-flute design supports controlled drilling in brittle materials such as ceramic and glass\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance of +0.0000 to -0.0005 inches meets tight-fit holemaking requirements\u003c\/li\u003e\n\u003cli\u003eDIN-compliant Series 200 construction for consistent dimensional standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers, drill presses, and manual mills where a straight-shank carbide die drill is required for holemaking in ferrous, non-ferrous, stainless, hardened, and exotic alloy workpieces.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit should be installed by a qualified machinist familiar with carbide tooling requirements. Secure the shank firmly in an appropriate collet or drill chuck rated for the 0.7344-inch shank diameter before starting the spindle. Solid carbide tooling is brittle and susceptible to breakage under side-loading or interrupted cuts  -  avoid lateral force during operation. Verify spindle speed and feed rate against material-specific cutting data before use; running carbide tooling dry or at incorrect parameters will cause premature failure.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Type\u003c\/strong\u003e: Straight-Flute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 47\/64 inches (0.7344 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.7344 inches (47\/64 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Alloy Steel, Austenitic Stainless Steel, Ceramic, Glass, Hardened Materials, High Temperature Alloy, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20073440\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51740753068338,"sku":"20073440","price":495.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d0e6c27f83536eeea8a0e7beb6bd97e_b2e59f20-9613-440c-89f3-724b82f89304.jpg?v=1788827207","url":"https:\/\/voomisupply.com\/products\/m-a-ford-20073440-carbide-die-drill-bit-47-64-in","provider":"Voomi Supply","version":"1.0","type":"link"}