{"product_id":"m-a-ford-20043310-die-drill-bit-0-4331-in-carbide","title":"M.a. Ford. 20043310 Die Drill Bit 0.4331 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 20043310 is a solid carbide die drill bit engineered for precision holemaking in demanding industrial applications. Built to DIN standards, this straight-flute drill features a 135-degree split point and web-thinned geometry that reduces entry thrust and improves centering accuracy. At 0.4331 inches (11.00 mm) in diameter, it is offered uncoated for compatibility with a broad range of workpiece materials. The two-flute, right-hand cutting configuration is well suited to machinists and toolroom technicians working on dies, molds, and close-tolerance bores in production environments.\u003c\/p\u003e\n\u003cp\u003eThis drill is intended for holemaking in cast iron, non-ferrous metals, stainless steel, alloy steel, hardened materials, high-temperature alloys, titanium, and austenitic stainless steel. Its solid carbide construction and web-thinned split point make it particularly effective when drilling abrasive or work-hardening materials where high-speed steel tooling loses edge life prematurely. Typical install scenarios include die and mold shops, precision machining centers, and aerospace component fabrication where tight diameter tolerances are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for extended tool life in abrasive and hard workpiece materials\u003c\/li\u003e\n  \u003cli\u003e135-degree split point reduces walking and entry thrust for accurate hole starts\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned geometry lowers cutting forces and improves chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight-flute design suited to brittle materials such as cast iron and ceramics\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance held to +0.0000 to -0.0005 inches for close-tolerance bores\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction; no coolant-through feature, suitable for flood or mist coolant delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for primary workpiece materials including cast iron, non-ferrous metal, stainless steel, and steel (material codes H, K, M, N, P, S); secondary materials include alloy steel, austenitic stainless steel, ceramic, glass, hardened materials, high-temperature alloy, stainless steel, and titanium. Manufactured to DIN standards as part of M.A. FORD. Series 200.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or toolroom technicians. Secure the shank fully in a collet or drill chuck rated for the 11.00 mm shank diameter before initiating a cut. Verify spindle speed and feed rate against published carbide tooling parameters for the specific workpiece material before running. Carbide tooling is brittle — avoid interrupted cuts, side loads, or re-chucking with worn or damaged holders, as these conditions can cause tool breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.4331 inches (11.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.756 inches (70.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.004 inches (25.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.4331 inches (11.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.752 inches (44.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches (+0.000 to -0.013 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20043310\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51744849166642,"sku":"20043310","price":165.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d0e6c27f83536eeea8a0e7beb6bd97e_7d2f166f-e3eb-496c-9d74-a14590b46423.jpg?v=1788861521","url":"https:\/\/voomisupply.com\/products\/m-a-ford-20043310-die-drill-bit-0-4331-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}