{"product_id":"m-a-ford-20029680-solid-carbide-die-drill-bit-19-64-in","title":"M.a. Ford 20029680 Solid Carbide Die Drill Bit 19\/64 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 20029680 is a solid carbide, straight-flute die drill bit engineered for precision holemaking in demanding materials. Sized at 19\/64 inches (0.2969 inches decimal), it features a 135-degree split point for fast, self-centering starts and reduced thrust. The uncoated carbide construction delivers hardness and heat resistance suitable for production drilling where tool life and dimensional accuracy are critical. With an overall length of 2.5 inches and a flute length of 0.75 inches, this bit is suited for short, controlled drilling applications typical in die and mold work. It is right-hand cutting with a web-thinned geometry for improved chip evacuation and reduced walking. Machinists, tool-and-die makers, and precision fabricators are the primary users of this bit.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is designed for holemaking in cast iron, non-ferrous metals, stainless steel, alloy steel, austenitic stainless steel, hardened materials, high-temperature alloys, titanium, ceramic, and glass. The Series 200 designation places it in a die drill category intended for close-tolerance work, making it well suited to tool rooms, die shops, and precision machining cells. Its compact 2.5-inch overall length allows use in tight setups and short-travel spindles common in bench drilling and CNC machining center applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for superior hardness and wear resistance in abrasive and hard workpiece materials\u003c\/li\u003e\n  \u003cli\u003e135-degree split point reduces thrust and enables self-centering entry without a center punch in many applications\u003c\/li\u003e\n  \u003cli\u003eStraight-flute, web-thinned geometry promotes chip clearance and minimizes heat buildup at the cutting edge\u003c\/li\u003e\n  \u003cli\u003eUncoated finish maintains a sharp edge and is compatible with a wide range of cutting fluids\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance held to +0.0000 to -0.0005 inches for consistent, close-tolerance hole sizing\u003c\/li\u003e\n  \u003cli\u003eMeets DIN standards for dimensional and geometric accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in tool-room, die, and precision machining applications involving cast iron, non-ferrous metal, stainless steel, alloy steel, hardened materials, high-temperature alloys, titanium, ceramic, and glass workpieces.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is intended for use by qualified machinists and tool-and-die tradespeople on drill presses, CNC machining centers, or precision bench drilling equipment. Secure the shank firmly in a collet or drill chuck rated for the 19\/64-inch shank diameter before operation. Use appropriate cutting fluid for the workpiece material to manage heat and extend tool life. Carbide tooling is brittle  -  avoid side-loading, interrupted cuts without proper support, and striking the cutting edge against hard surfaces during handling or setup.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Type\u003c\/strong\u003e: Straight-Flute\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 19\/64 inches (0.2969 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3\/4 inches (0.750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 19\/64 inches (0.2969 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Alloy Steel, Austenitic Stainless Steel, Ceramic, Glass, Hardened Materials, High Temperature Alloy, Titanium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20029680\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51741245735218,"sku":"20029680","price":87.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d0e6c27f83536eeea8a0e7beb6bd97e_8fe6f542-7a2c-405b-b952-6ea481dd156b.jpg?v=1788830305","url":"https:\/\/voomisupply.com\/products\/m-a-ford-20029680-solid-carbide-die-drill-bit-19-64-in","provider":"Voomi Supply","version":"1.0","type":"link"}