{"product_id":"m-a-ford-20019600-carbide-die-drill-bit-0-1960in-9","title":"M.a. Ford. 20019600 Carbide Die Drill Bit 0.1960in 9","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 20019600 is a solid carbide, straight-flute die drill bit designed for precision holemaking in demanding industrial and toolroom applications. Built to Series 200 standards, this bit features a 135-degree split point with web thinning for fast, accurate starts without a center punch. The 0.1960-inch (No. 9 wire) diameter is held to a tight tolerance of +0.0000 to -0.0005 inches, making it a dependable choice where hole diameter control is critical. With a 2-flute, right-hand cutting geometry and an uncoated carbide body, it is suited for machinists and tool-and-die professionals who need consistent performance across a range of workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis bit is well suited for precision drilling operations in tool-and-die shops, machine shops, and production environments. It handles a broad range of primary workpiece materials including cast iron, non-ferrous metals, stainless steel, and steel. Secondary workpiece materials include alloy steel, austenitic stainless steel, high temperature alloys, titanium, hardened materials, ceramic, and glass. At 2 inches overall length with a 0.75-inch flute and a 1.25-inch shank, it fits standard drill chucks and die-drilling setups where compact reach and rigidity are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e135-degree split point with web thinning reduces thrust and eliminates walking on entry\u003c\/li\u003e\n  \u003cli\u003eTight diameter tolerance of +0.0000 to -0.0005 inches for controlled hole sizing\u003c\/li\u003e\n  \u003cli\u003eRight-hand, straight-flute geometry optimized for die drilling and short-hole applications\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for use with cutting fluids on a wide range of ferrous and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eMeets DIN standards for consistent dimensional quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard drill chucks and die-drilling fixtures that accept a 0.1960-inch straight shank. Compatible primary workpiece material codes H, K, M, N, P, and S per Series 200 classification, covering cast iron, non-ferrous metal, stainless steel, and steel applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or tool-and-die technicians familiar with carbide tooling. Ensure the workpiece is securely fixtured and the spindle is properly aligned before engaging the bit, as carbide is brittle and sensitive to side loading. Cutting fluid is recommended to extend tool life, particularly when drilling stainless steel or high-temperature alloys. Inspect the bit for chipping or cracking before each use and replace if any damage is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1960 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Size\u003c\/strong\u003e: No. 9\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1960 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20019600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51731409961266,"sku":"20019600","price":58.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d0e6c27f83536eeea8a0e7beb6bd97e_0073cef3-271d-4697-acac-4645fdfc3405.jpg?v=1788730681","url":"https:\/\/voomisupply.com\/products\/m-a-ford-20019600-carbide-die-drill-bit-0-1960in-9","provider":"Voomi Supply","version":"1.0","type":"link"}