{"product_id":"m-a-ford-20012600-die-drill-bit-0-126-in-carbide","title":"M.a. Ford. 20012600 Die Drill Bit 0.126 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 20012600 is a solid carbide die drill bit engineered for precision holemaking in demanding materials. Featuring a 0.1260-inch diameter, a 135-degree split point, and a web-thinned geometry, this bit reduces thrust load and promotes accurate self-centering at the start of the cut. The straight-flute design is suited to applications where chip evacuation through flute spiraling is not required. With two flutes and a right-hand cutting direction, it is sized for toolroom, die, and mold work where tight tolerances and material hardness place high demands on the cutting tool.\u003c\/p\u003e\u003cp\u003eThis drill is well matched to machining operations involving cast iron, stainless steel, steel, aluminum, alloy tool steel, hardened steel, high-temperature alloys, low carbon steel, medium carbon steel, and austenitic stainless steel. The Series 200 classification places it in M.A. FORD.'s die drill line, which is commonly used by machinists, tool-and-die makers, and precision CNC operators working in job shop and manufacturing environments. The uncoated carbide construction makes it a dependable choice when coating compatibility with specific cutting fluids or workpiece materials is a consideration.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.1260-inch diameter with a tight tolerance of +0.0000 to -0.0005 inches for precise fit in die and mold applications\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces walking and lowers entry thrust on hard materials\u003c\/li\u003e\n\u003cli\u003eWeb-thinned geometry further reduces axial cutting force\u003c\/li\u003e\n\u003cli\u003eStraight-flute configuration suited to short-chip materials such as cast iron and hardened steel\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and wear resistance in difficult-to-machine alloys\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction, two flutes, no coolant-through requirement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in holemaking operations on cast iron, non-ferrous metals, stainless steel, steel, and high-temperature alloys per the primary workpiece material designations H, K, M, N, P, and S. Conforms to DIN standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and operation should be performed by qualified machinists familiar with carbide tooling. Secure the shank firmly in a compatible collet or drill chuck rated for the 0.1260-inch shank diameter before starting the spindle. Carbide is brittle and susceptible to chipping from interrupted cuts or excessive runout — verify runout is within acceptable limits before engaging the workpiece. Discontinue use and inspect the bit if chipping, burning, or unusual noise is observed during cutting.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Type\u003c\/strong\u003e: Straight-Flute Die Drill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1260 inches (3.20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.4961 inches (38.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.6299 inches (16.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1260 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 22.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches (+0.000 to -0.013 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0077 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20012600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51727424225586,"sku":"20012600","price":42.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d0e6c27f83536eeea8a0e7beb6bd97e_f46b7adf-0f82-4467-9a7a-e1fc7e1b8eff.jpg?v=1788677755","url":"https:\/\/voomisupply.com\/products\/m-a-ford-20012600-die-drill-bit-0-126-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}