{"product_id":"m-a-ford-20011000-carbide-die-drill-bit-0-1100-in-35","title":"M.a. Ford 20011000 Carbide Die Drill Bit 0.1100 in 35","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD 20011000 is a solid carbide, straight-flute die drill bit designed for precision holemaking in hard and demanding workpiece materials. It carries a 0.1100-inch diameter, a 135-degree split point for self-centering entry, and a web-thinned geometry that reduces thrust and improves chip evacuation. The uncoated carbide construction delivers consistent dimensional accuracy with a diameter tolerance of +0.0000 to -0.0005 inches. At 1.5 inches overall length with a 0.625-inch flute, this bit is suited to close-tolerance drilling applications where repeatability and tool life in difficult materials are critical priorities. It is installed by machinists, toolroom technicians, and precision metalworking professionals.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for holemaking in a broad range of primary workpiece materials including cast iron, non-ferrous metals, stainless steel, and steel. Secondary material suitability extends to alloy steel, austenitic stainless steel, hardened materials, high-temperature alloys, titanium, glass, and ceramic. The straight-flute configuration and split point make it well suited to die work, mold work, and any application where a standard jobber-length bit cannot access the feature or where the short flute length provides added rigidity in a deep-hole setup.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003e135-degree split point promotes self-centering and reduces walking on entry\u003c\/li\u003e\n\u003cli\u003eWeb-thinned geometry lowers cutting thrust and improves chip clearance\u003c\/li\u003e\n\u003cli\u003eStraight-flute design suited to die drilling and short-flute rigidity requirements\u003c\/li\u003e\n\u003cli\u003eUncoated finish maintains sharp edge geometry without coating buildup at small diameters\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction; two flutes; DIN standard compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit die drill bit for applications requiring a 0.1100-inch (Wire Size 35) straight-flute carbide drill conforming to DIN standards and M.A. FORD Series 200 specifications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis drill bit is installed by machinists and toolroom technicians in drill presses, CNC machining centers, or hand-held precision drilling fixtures. Secure the shank fully in a collet or drill chuck rated for the shank diameter before operation, and verify spindle runout is within acceptable tolerance for small-diameter carbide tooling. Power down and de-energize the machine before changing tooling. Carbide tooling is brittle — avoid side-loading, interrupted cuts without appropriate feed rate adjustment, and dropping or impacting the cutting edge.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1100 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Size\u003c\/strong\u003e: 35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1100 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Treatment\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Alloy Steel, Austenitic Stainless Steel, Ceramic, Glass, Hardened Materials, High Temperature Alloy, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20011000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51728650305842,"sku":"20011000","price":37.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d0e6c27f83536eeea8a0e7beb6bd97e_1cf150ef-96b5-4f45-98fc-d480f927c234.jpg?v=1788694417","url":"https:\/\/voomisupply.com\/products\/m-a-ford-20011000-carbide-die-drill-bit-0-1100-in-35","provider":"Voomi Supply","version":"1.0","type":"link"}