{"product_id":"m-a-ford-20007850-solid-carbide-die-drill-bit-0-0785-in","title":"M.a. Ford 20007850 Solid Carbide Die Drill Bit 0.0785 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 20007850 is a solid carbide, straight-flute die drill bit designed for precision holemaking in demanding materials. Built to Series 200 specifications, it measures 0.0785 inches in diameter (Wire Size 47) with a 135-degree split point and web-thinned geometry that reduces entry force and improves chip evacuation. The uncoated carbide construction delivers rigidity and heat resistance in applications where high-speed steel tooling falls short. With a 3\/8-inch flute length and 1-1\/2-inch overall length, this bit is sized for toolroom, die, and mold work where tight tolerances and short, controlled cuts are the standard. Right-hand cutting direction. Two flutes. Diameter tolerance is +0.0000 to -0.0005 inches, confirming this is a precision-ground tool intended for close-tolerance work.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is rated for use in cast iron, non-ferrous metals, stainless steel, and steel as primary workpiece materials. Secondary material compatibility extends to alloy steel, austenitic stainless steel, hardened materials, high-temperature alloys, titanium, ceramic, and glass. The short flute and rigid carbide body make it well-suited for die and mold shops, toolrooms, and any application requiring accurate, repeatable hole placement in hard or abrasive materials. It conforms to DIN standards. Installed by machinists and toolroom technicians on drill presses, CNC machining centers, and precision benchtop equipment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e135-degree split point with web-thinned geometry reduces thrust force and self-centers on entry\u003c\/li\u003e\n  \u003cli\u003eWire Size 47 (0.0785 inches) diameter with tight tolerance of +0.0000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003eStraight-flute design suited to through and blind holes in brittle or short-chipping materials\u003c\/li\u003e\n  \u003cli\u003eUncoated finish maintains sharpness for regrinding and works without coating-related adhesion concerns\u003c\/li\u003e\n  \u003cli\u003eConforms to DIN standards; right-hand cut, two flutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for holemaking in cast iron, non-ferrous metal, stainless steel, and steel. Secondary compatible materials include alloy steel, austenitic stainless steel, ceramic, glass, hardened materials, high-temperature alloys, stainless steel, and titanium. Classified under M.A. FORD Series 200.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use by qualified machinists or toolroom technicians is recommended. Secure the shank fully in a collet or drill chuck rated for the 0.0785-inch shank diameter before operation. Verify spindle speed and feed rate are appropriate for the workpiece material and bit diameter before engaging the cut. Do not apply side loads to the flute length, as carbide tooling is brittle and will fracture under lateral stress.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.0785 inches (Wire Size 47)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches (1-1\/2 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0785 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.125 inches (1-1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20007850\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51728528081202,"sku":"20007850","price":32.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d0e6c27f83536eeea8a0e7beb6bd97e_31dae24a-367a-40d2-b119-d7ebfb6060b5.jpg?v=1788692756","url":"https:\/\/voomisupply.com\/products\/m-a-ford-20007850-solid-carbide-die-drill-bit-0-0785-in","provider":"Voomi Supply","version":"1.0","type":"link"}