{"product_id":"m-a-ford-17837512a-corner-radius-end-mill-3-8-in-5-flute","title":"M.a. Ford. 17837512A Corner Radius End Mill 3\/8 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 17837512A is a solid carbide corner radius end mill designed for high-performance material removal in demanding machining applications. It features a 3\/8-inch diameter, a 0.0150-inch corner radius, and five flutes arranged in a right-hand spiral with a 38-degree helix angle. The ALtima PVD coating extends tool life when cutting abrasive and hard materials. At 2.5 inches overall length with a 7\/8-inch length of cut, this single-end, centercutting tool handles both roughing and finishing operations without a tool change. It is suited for use in standard toolholders with a straight-cylindrical shank.\u003c\/p\u003e\n\u003cp\u003eThis end mill is engineered for machinists and CNC operators working with steel, stainless steel, cast iron, superalloys, and titanium. Its close-pitch, five-flute geometry supports higher feed rates while maintaining surface finish quality. The centercutting design allows plunge entry, adding versatility in slotting, profiling, and pocket-milling operations. Series 178 from M.A. FORD. targets high-performance cutting scenarios where tool life and dimensional consistency are critical. The corner radius geometry reduces stress concentration at the cutting edge, helping extend service intervals on hard and abrasive workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with ALtima PVD coating for wear resistance on hard materials\u003c\/li\u003e\n  \u003cli\u003e0.0150-inch corner radius reduces edge chipping and extends tool life\u003c\/li\u003e\n  \u003cli\u003eFive-flute, close-pitch design supports higher feed rates for roughing and finishing\u003c\/li\u003e\n  \u003cli\u003e38-degree helix angle improves chip evacuation in deep cuts\u003c\/li\u003e\n  \u003cli\u003eCentercutting capable  -  supports plunge entry for pocket and slot work\u003c\/li\u003e\n  \u003cli\u003eRight-hand flute direction and right-hand cutting for standard CNC spindle use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-cylindrical toolholders. Rated for cutting steel, stainless steel, cast iron, superalloys, and titanium (material codes P, M, K, S). Part of the M.A. FORD. Series 178 high-performance end mill line.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or CNC setup technicians using a compatible toolholder sized for a 3\/8-inch straight-cylindrical shank. Verify runout and toolholder clamping force before cutting to maintain dimensional tolerances. Power down and lock out the spindle before changing or seating the tool. Follow the machine manufacturer and cutting tool manufacturer feed and speed recommendations for the specific workpiece material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inches (0.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: +0.00120 to -0.00120 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 7\/8 inches (0.8750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ALtima (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Close\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 178\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17837512A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51744013287730,"sku":"17837512A","price":123.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/94a66028cc0a32227354af1db9807783_e383107f-e6c6-4237-be08-b7c79d8469a7.jpg?v=1788852914","url":"https:\/\/voomisupply.com\/products\/m-a-ford-17837512a-corner-radius-end-mill-3-8-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}