{"product_id":"m-a-ford-17819600a-square-end-mill-0-1968-in-5-flute-carbide","title":"M.a. Ford 17819600A Square End Mill 0.1968 in 5 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 17819600A is a solid carbide square end mill designed for precision milling operations across a range of workpiece materials. It features a 0.1968-inch (5.00 mm) mill diameter with five flutes and a 0.5118-inch (13.00 mm) length of cut, making it well suited for finishing passes and tight-tolerance slotting where tool rigidity and surface finish matter. The ALtima finish coating improves wear resistance and heat dissipation during cutting. Right-hand cut and right-hand flute orientation are standard. A 38-degree helix angle promotes efficient chip evacuation, and the centercutting geometry allows direct plunge entry into the workpiece.\u003c\/p\u003e\n\u003cp\u003eThis end mill is appropriate for machining a broad spectrum of materials including steels, stainless steels, cast irons, non-ferrous metals, and high-temperature alloys, as indicated by the primary workpiece material codes H, K, M, P, and S. It is used in CNC milling centers and manual knee mills for contouring, profiling, slotting, and side milling operations. The straight-cylindrical shank with a 6.00 mm (approximately 0.2362 inches) diameter fits standard collet chucks and end mill holders. The variable index geometry reduces harmonic chatter at the spindle, extending tool life in demanding cuts. Series 178 designation identifies it within M.A. FORD's extended-flute carbide end mill family.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for maximum rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003eALtima finish coating for improved heat resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003eFive flutes with 38-degree helical geometry for efficient chip evacuation and smooth surface finish\u003c\/li\u003e\n  \u003cli\u003eVariable index flute spacing reduces chatter and vibration during cutting\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables direct plunge milling without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute configuration compatible with standard CNC spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with workpiece material categories H (hardened steels), K (cast iron), M (stainless steel), P (steel), and S (high-temperature alloys and titanium). Fits standard straight-bore collet chucks and end mill holders sized for a 6.00 mm shank diameter. Series 178 product family from M.A. FORD.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by qualified machinists familiar with CNC or manual milling equipment. Ensure the spindle and machine are fully stopped and locked out before mounting or removing the tool. Confirm collet or holder bore diameter matches the 6.00 mm shank before tightening to prevent runout. Follow the machine manufacturer and tooling manufacturer guidelines for recommended speeds and feeds based on workpiece material and depth of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1968 inches (5.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.5118 inches (13.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut Range\u003c\/strong\u003e: 0.5000 to 0.6000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6.00 mm (approximately 0.2362 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 57.00 mm (approximately 2.244 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: ALtima\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.048 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.008 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 178\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17819600A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51728763355442,"sku":"17819600A","price":71.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/94a66028cc0a32227354af1db9807783.jpg?v=1788695970","url":"https:\/\/voomisupply.com\/products\/m-a-ford-17819600a-square-end-mill-0-1968-in-5-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}