{"product_id":"m-a-ford-17710016a-corner-radius-end-mill-1in-4-flute","title":"M.a. Ford. 17710016A Corner Radius End Mill 1in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 17710016A is a solid carbide corner radius end mill designed for high-performance material removal in demanding machining applications. Built to Series 177 specifications, it features a 1-inch cutting diameter, a 0.06-inch corner radius, and an ALTiN (ALtima) PVD coating that provides heat and wear resistance during aggressive cuts. The variable helix geometry, ranging from 35 to 38 degrees, reduces harmonic chatter and improves surface finish. With four flutes and a center-cutting design, this end mill handles both roughing and finishing passes in a single tool. It is intended for use in CNC machining centers with standard straight-cylindrical toolholders.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for cutting steel, stainless steel, cast iron, superalloys, and titanium  -  workpiece material codes P, M, K, and S. It is classified as a short-length tool, making it appropriate for setups where rigidity is a priority. The 1.5-inch length of cut and 4-inch overall length make it a practical choice for milling slots, pockets, and profiling operations on ferrous and exotic alloy components in both job shop and production environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eALTiN (ALtima) PVD coating for extended tool life in high-temperature cutting conditions\u003c\/li\u003e\n\u003cli\u003eVariable helix design (35 to 38 degrees) reduces chatter and improves surface finish\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capability allows plunge entry without pre-drilling\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute spiral for use with standard CNC spindle rotation\u003c\/li\u003e\n\u003cli\u003e0.06-inch corner radius reduces edge chipping and stress concentration at corners\u003c\/li\u003e\n\u003cli\u003eRated for roughing and finishing in steel, stainless steel, cast iron, superalloys, and titanium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard straight-cylindrical toolholders. Suitable for CNC machining centers running steel, stainless steel, cast iron, superalloys, and titanium workpieces.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by machining technicians or CNC setup personnel. Ensure the spindle is fully stopped and the machine is in a safe state before loading or changing tooling. Verify toolholder bore tolerances against the shank diameter tolerance of +0.0000\/-0.0005 inches to ensure proper grip and runout performance. Follow the machine tool manufacturer and toolholder manufacturer specifications for drawbar torque and pull-stud retention.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 to 38 degrees (variable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ALTiN (ALtima) PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000\/-0.0030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0000\/-0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 177\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17710016A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51740078932274,"sku":"17710016A","price":800.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e6e333674fb84484aaeabb0acb4f3aed_6cabdc0e-50da-4f5a-b830-d467626a54dc.jpg?v=1788822153","url":"https:\/\/voomisupply.com\/products\/m-a-ford-17710016a-corner-radius-end-mill-1in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}