{"product_id":"m-a-ford-16437500-square-end-mill-3-8-in-2-flute-carbide","title":"M.a. Ford. 16437500 Square End Mill 3\/8 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 16437500 is a solid carbide square end mill designed for precision material removal in milling applications. Built from micrograin carbide, it delivers rigidity and wear resistance in demanding cutting conditions. The 2-flute, spiral-flute geometry with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. At 3\/8 inch in diameter with a 5\/8 inch length of cut and 2-inch overall length, this is a stub-length tool suited for situations where rigidity takes priority over reach. It is centercutting, allowing for direct plunge entry without a pre-drilled pilot hole. Licensed machinists, toolmakers, and CNC operators are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis end mill is rated for use across a broad range of workpiece material groups, including cast iron, non-ferrous metals, steel, super alloys, and general-purpose materials corresponding to material codes H, K, M, N, P, and S. The straight-cylindrical shank fits standard collet chucks and end mill holders accepting a 3\/8 inch bore. The stub-length profile makes it well suited for shallow-pocket milling, slotting, and profiling operations where tool deflection must be minimized. It carries a right-hand cut and right-hand flute orientation and is supplied uncoated, making it a cost-effective option for shops that prefer uncoated carbide for specific material pairings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide construction for extended tool life and edge stability\u003c\/li\u003e\n  \u003cli\u003e2-flute spiral-flute design with 30-degree helix for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting capability allows direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eStub-length profile minimizes deflection in shallow-pocket and slotting operations\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute orientation for standard CNC and manual mill setups\u003c\/li\u003e\n  \u003cli\u003eUncoated finish compatible with a wide range of workpiece material groups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for workpiece material codes H, K, M, N, P, and S, covering cast iron, non-ferrous metals, steel, stainless, super alloys, and similar materials. Accepts standard 3\/8 inch collet chucks and end mill holders. Part of M.A. FORD. Series 164.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists and CNC operators on milling machines and machining centers. Secure the straight-cylindrical shank in a properly sized collet or end mill holder, ensuring the tool is fully seated and the holder is torqued to machine specifications before operation. Confirm spindle speed and feed rate are set per the manufacturer cutting data for the specific workpiece material before engaging the cutter. Inspect the cutting edges for chipping or wear before each use, as carbide tools can fracture if run on a damaged edge.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 164\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Workpiece Material Codes\u003c\/strong\u003e: H, K, M, N, P, S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 16437500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51744676249906,"sku":"16437500","price":83.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f28ec7f57361fb986630e9e7e9d67360_336f5452-acbb-4030-b09c-df0795ae1b1f.jpg?v=1788859884","url":"https:\/\/voomisupply.com\/products\/m-a-ford-16437500-square-end-mill-3-8-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}