{"product_id":"m-a-ford-13862504-square-end-mill-5-8-inch-3-flute","title":"M.a. Ford. 13862504 Square End Mill 5\/8 Inch 3 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 13862504 is a solid carbide square end mill engineered for precision material removal in demanding machining applications. With a 0.625-inch mill diameter, a 1.625-inch length of cut, and a 36-degree helix angle, it delivers efficient chip evacuation and a clean, accurate finish. The three-flute, helical flute geometry balances chip clearance with cutting speed. At 4 inches overall length with a straight-cylindrical 0.625-inch shank, this is a single-end, centercutting tool suited for plunge, slot, and peripheral milling operations. It is uncoated and designed primarily for non-ferrous metal workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis end mill is appropriate for CNC machining centers, manual mills, and tool-and-die work where tight tolerances are required on non-ferrous materials such as aluminum, brass, copper, and similar alloys. The right-hand cut and right-hand flute configuration is standard for conventional spindle setups. The centercutting capability allows direct plunge entry without a pre-drilled pilot hole, adding flexibility in typical shop-floor and production environments. It is sized for use in standard 5\/8-inch collet or end mill holder setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous applications\u003c\/li\u003e\n  \u003cli\u003e36-degree helix angle promotes efficient chip evacuation and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eThree helical flutes balance material removal rate with chip clearance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute for standard spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of plus 0.000 to minus 0.0005 inches for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a Series 138 solid carbide square end mill for use in standard 5\/8-inch straight-cylindrical collet chucks or end mill holders on CNC and manual milling machines. Primary workpiece material designation is non-ferrous metal (material code N).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes must be performed with the machine fully powered down and the spindle at a complete stop. Ensure the shank is fully seated and secured to the proper torque specification of the holder manufacturer before operation. Shank diameter is rated to h6 tolerance  -  verify collet or holder bore condition before clamping to avoid runout. This tool should be installed and adjusted by a qualified machinist familiar with milling operations and applicable shop safety protocols.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches (1-5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 36 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.000 to minus 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 138\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 13862504\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51743130517810,"sku":"13862504","price":330.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f857fc6fa96f6209f77d67bdd9e438b4_2fc0e87a-f42f-4795-b570-70342e624213.jpg?v=1788843046","url":"https:\/\/voomisupply.com\/products\/m-a-ford-13862504-square-end-mill-5-8-inch-3-flute","provider":"Voomi Supply","version":"1.0","type":"link"}