{"product_id":"m-a-ford-13837509-square-end-mill-3-8-inch-3-flute","title":"M.a. Ford. 13837509 Square End Mill 3\/8 Inch 3 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 13837509 is a solid carbide square end mill engineered for precision milling in non-ferrous metal applications. With a 0.375 inch mill diameter, a 2.5 inch length of cut, and 3 helical flutes, this single-end tool delivers sharp, consistent chip evacuation and smooth finishes on aluminum, copper, brass, and similar materials. The right-hand cut and right-hand flute geometry combined with a 36-degree helix angle promote aggressive material removal while reducing chatter. Licensed machinists and tooling professionals install this end mill in CNC machining centers and manual mills requiring long-reach capability.\u003c\/p\u003e\n\u003cp\u003eThe 13837509 is suited for production and job-shop environments where non-ferrous metal stock is the primary workpiece material. Its 4.5 inch overall length and straight-cylindrical shank allow extended reach into deep pockets and slots without sacrificing rigidity. The centercutting design permits plunge milling in addition to peripheral and slot cuts. This tool fits applications where tight diameter tolerances are required, holding +0.000 to -0.0005 inches on the mill diameter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for hardness and wear resistance in non-ferrous machining\u003c\/li\u003e\n  \u003cli\u003e36-degree helix angle promotes efficient chip evacuation and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows plunge, slot, and peripheral milling in a single tool\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suited to non-ferrous materials where coating adhesion is unnecessary\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.000 to -0.0005 inches for precise fitment in close-tolerance work\u003c\/li\u003e\n  \u003cli\u003e3 flutes with helical flute type for smooth surface finish on aluminum and similar alloys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a Series 138 solid carbide square end mill for use in CNC and manual milling applications involving non-ferrous metals. Primary workpiece material code N (Non-Ferrous Metal).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. The machine spindle must be fully stopped and locked out before changing tooling. Seat the straight-cylindrical shank fully in the collet or chuck and torque the holder to the machine manufacturer's specification. Verify runout with a dial indicator before beginning the cut to protect both the tool and workpiece.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 36 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 138\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 13837509\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51743274041650,"sku":"13837509","price":196.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f857fc6fa96f6209f77d67bdd9e438b4_ad4018af-2079-4054-b8e7-4899d911bfc7.jpg?v=1788844890","url":"https:\/\/voomisupply.com\/products\/m-a-ford-13837509-square-end-mill-3-8-inch-3-flute","provider":"Voomi Supply","version":"1.0","type":"link"}