{"product_id":"m-a-ford-13650007-square-end-mill-0-5-in-2-flute-carbide","title":"M.a. Ford. 13650007 Square End Mill 0.5 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 13650007 is a solid carbide square end mill designed for high-precision milling of non-ferrous metals. Built from micrograin carbide, it delivers tight dimensional control with a mill diameter tolerance of +0.000 to -0.003 inches. The 45-degree helical flute geometry promotes aggressive chip evacuation and reduces cutting forces. With a 0.5-inch diameter and 2.5-inch length of cut, this two-flute end mill suits slotting, profiling, and pocketing operations where chip clearance and surface finish matter. It ships bright and uncoated, making it well matched to aluminum, brass, copper, and similar non-ferrous workpiece materials. Machinists and tool-and-die technicians are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill fits standard CNC machining centers and manual mills equipped with a straight cylindrical tool holder accepting a 0.5-inch shank. Its 5-inch overall length provides reach for deeper setups while the helical flute design keeps deflection manageable. The Series 136 classification positions it as a general-purpose non-ferrous roughing and finishing tool. The centercutting geometry allows plunge entry, expanding its usefulness in milling programs that require ramp or plunge moves without a pre-drilled pilot hole.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for rigidity and wear resistance in non-ferrous applications\u003c\/li\u003e\n\u003cli\u003e45-degree helix angle promotes efficient chip evacuation and smooth cutting action\u003c\/li\u003e\n\u003cli\u003eCentercutting capable — supports plunge and ramp entry cuts\u003c\/li\u003e\n\u003cli\u003eRight-hand cut with right-hand helical flutes for standard spindle rotation\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suited to aluminum and other non-ferrous metals where coatings may cause built-up edge\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance of +0.000 to -0.003 inches for consistent fit in close-tolerance work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and manual milling machines with tool holders accepting a 0.5-inch straight cylindrical shank. Primary workpiece material compatibility is non-ferrous metals (Material Code N), including aluminum, brass, and copper alloys.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Power down and lock out the spindle before inserting or removing the tool from the holder. Ensure the shank is fully seated and the collet or end mill holder is torqued to the machine manufacturer's specification. Inspect the cutting edges for chipping before each setup, as carbide is brittle and can sustain damage if dropped or improperly stored.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 136\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 13650007\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51735283007794,"sku":"13650007","price":367.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d4f8a498afc0fdb3d1da60a4c771ee9e_22120327-19fe-4c11-bda3-9cb2a34c6191.jpg?v=1788771473","url":"https:\/\/voomisupply.com\/products\/m-a-ford-13650007-square-end-mill-0-5-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}