{"product_id":"m-a-ford-13637501r-125-corner-radius-end-mill-3-8in-2-flute","title":"M.a. Ford 13637501R.125 Corner Radius End Mill 3\/8in 2 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 13637501R.125 is a solid carbide corner radius end mill designed for finishing operations in non-ferrous metal applications. It features a 3\/8 inch mill diameter with a 1\/8 inch (0.1250 inch) corner radius, providing a controlled edge blend that reduces stress concentrations in machined profiles. The 2-flute, right-hand spiral geometry with a high helix angle promotes efficient chip evacuation. With a long-length configuration and 1-1\/2 inch reach, this tool is suited for cuts requiring additional clearance from the shank. It is center-cutting, allowing plunge entry, and runs uncoated for applications where coating compatibility with the workpiece material must be managed.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use on non-ferrous metals including aluminum, copper, brass, and similar materials. The coarse pitch and high helix flute geometry support higher feed rates typical in aluminum finishing passes. It mounts in standard straight-bore toolholders accepting a 3\/8 inch shank diameter. The long overall length of 3-1\/4 inches accommodates setups where extended reach into a workpiece or fixture clearance is required. Machinists and CNC operators working on mills, machining centers, and manual knee mills will find this tool applicable to profiling, slotting, and contour finishing tasks on non-ferrous workpieces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8 inch mill diameter with 0.1250 inch corner radius for controlled edge blending on finished surfaces\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous finishing applications\u003c\/li\u003e\n  \u003cli\u003e2-flute, right-hand cut, high helix spiral geometry for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eLong-length series with 3-1\/4 inch OAL and 1-1\/2 inch reach for extended-reach setups\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish  -  no coating interaction with workpiece material\u003c\/li\u003e\n  \u003cli\u003eCorner radius tolerance of plus 0.00200 to minus 0.00200 inches; mill diameter tolerance of plus 0.0000 to minus 0.0030 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-bore toolholders accepting a 3\/8 inch cylindrical shank. Primary workpiece material compatibility is non-ferrous metal (material code N). Part of M.A. FORD Series 136.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the machine powered down and in a locked-out state per applicable machine safety procedures. Ensure the toolholder bore is clean and free of debris before seating the shank to achieve proper runout. Torque the toolholder to the machine and toolholder manufacturer specifications. Verify spindle speed and feed rate settings are appropriate for the workpiece material and depth of cut before initiating the first pass.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/8 inches (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: plus 0.00200 to minus 0.00200 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.0000 to minus 0.0030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/2 inches (1.0000 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 1-1\/2 inches (1.5000 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/4 inches (3.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 136\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.1591 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 13637501R.125\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51743383454002,"sku":"13637501R.125","price":238.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d4f8a498afc0fdb3d1da60a4c771ee9e_94f8ea88-65ae-49c1-a686-dcaf922ef106.jpg?v=1788846430","url":"https:\/\/voomisupply.com\/products\/m-a-ford-13637501r-125-corner-radius-end-mill-3-8in-2-flute","provider":"Voomi Supply","version":"1.0","type":"link"}