{"product_id":"m-a-ford-12112501-square-end-mill-1-8-inch-solid-carbide","title":"M.a. Ford. 12112501 Square End Mill 1\/8 Inch Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 12112501 is a solid carbide square end mill designed for precision milling operations across a broad range of workpiece materials. With a 0.125 inch (1\/8 inch) cutting diameter and a 0.500 inch length of cut, this two-flute tool delivers clean square shoulders and slot profiles in a compact, standard-length format. The 30-degree helical flute geometry promotes efficient chip evacuation and reduces cutting forces. At 1.5 inches overall length with a 0.125 inch straight cylindrical shank, it fits standard collet chucks and end mill holders used in CNC and manual milling setups. Solid carbide construction provides rigidity and wear resistance well beyond high-speed steel tooling. This is a centercutting tool, allowing direct plunge entry into the workpiece.\u003c\/p\u003e\n\u003cp\u003eThe 12112501 is a Series 121 uncoated solid carbide end mill suited for machining a wide variety of materials including cast iron, non-ferrous metals, stainless steel, heat-resistant alloys, steel, and superalloys, corresponding to material codes H, K, M, N, P, and S. Its compact 1\/8 inch diameter makes it well suited for fine detail work, narrow slot milling, and profiling operations on smaller workpieces or in confined features. Machinists and CNC operators in job shops, tool rooms, and production environments install and use this tool in standard end mill holders and precision collet systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and extended tool life compared to HSS\u003c\/li\u003e\n  \u003cli\u003eTwo-flute design optimizes chip clearance in slot milling and plunge operations\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand helical flutes reduce cutting forces and improve surface finish\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for a broad base material range without coating compatibility concerns\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.000 to -0.002 inches ensures consistent fit in tight-tolerance features\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with workpiece material codes H, K, M, N, P, and S as specified by M.A. FORD. Series 121. Designed for use with standard 1\/8 inch straight-bore collet chucks and end mill holders on CNC machining centers and manual knee mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool should be installed by a qualified machinist or CNC operator using a properly sized collet or end mill holder that matches the 0.125 inch shank diameter. Ensure the spindle and any workholding fixtures are secure and the machine is at zero RPM before tool changes. Apply appropriate cutting speeds and feed rates per the workpiece material; solid carbide tools are sensitive to runout and deflection, so verify holder concentricity before production runs. Do not exceed the rated length of cut to avoid tool deflection or breakage in deep-feature applications.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.500 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut Range\u003c\/strong\u003e: 0.500 to 0.600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.500 inches (1-1\/2 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 121\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12112501\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51741159194930,"sku":"12112501","price":45.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f1aa7282e05c057754ba9c5fee58ee3f.jpg?v=1788829711","url":"https:\/\/voomisupply.com\/products\/m-a-ford-12112501-square-end-mill-1-8-inch-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}