{"product_id":"m-a-ford-12100500-square-end-mill-0-005-in-2-flute-carbide","title":"M.a. Ford. 12100500 Square End Mill 0.005 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 12100500 is a solid carbide square end mill designed for precision micro-milling operations. With a cutting diameter of 0.005 inches and a length of cut of 0.015 inches, this tool is built for extremely fine detail work where dimensional accuracy is critical. The 1\/8-inch straight-cylindrical shank and 1.5-inch overall length make it compatible with standard collet systems used in CNC machining centers and high-speed spindles. The two-flute, right-hand spiral configuration with a 30-degree helix angle promotes efficient chip evacuation in tight-tolerance slots and contours. Machinists and tool-and-die professionals working in precision production environments are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for finish and detail milling passes in a wide range of workpiece materials, including hardened steels, cast irons, stainless steels, non-ferrous metals, high-temperature alloys, and titanium — corresponding to material codes H, K, M, N, P, and S. Its centercutting geometry allows it to plunge directly into a workpiece, which is useful in die cavity work, micro-slot cutting, and engraving applications. The uncoated carbide substrate is appropriate for applications where coating buildup at such fine diameters could compromise tolerances.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.005-inch cutting diameter for micro-scale milling with mill diameter tolerance of plus or minus 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance at small diameters\u003c\/li\u003e\n  \u003cli\u003e30-degree helix spiral flute promotes chip evacuation and reduces cutting pressure\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute configuration for standard CNC spindle rotation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical 1\/8-inch shank fits standard ER and end mill collet holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 1\/8-inch collet holders and end mill holders on CNC machining centers and high-speed micro-milling spindles. Suitable for workpiece material codes H, K, M, N, P, and S as specified by the manufacturer for Series 121.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this end mill should be performed by qualified machinists or CNC operators familiar with micro-tooling setups. Ensure the spindle and collet holder are clean and properly torqued before seating the shank to prevent runout at this diameter. At 0.005-inch diameter, even minor runout or vibration can cause tool breakage — confirm spindle balance and minimize overhang where possible. Always confirm correct spindle rotation direction before initiating a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.0005 \/ minus 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.015 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 121\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Workpiece Material Codes\u003c\/strong\u003e: H, K, M, N, P, S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12100500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51736839717170,"sku":"12100500","price":126.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b0d4432d0d15151a0a93e52d79862851.jpg?v=1788780945","url":"https:\/\/voomisupply.com\/products\/m-a-ford-12100500-square-end-mill-0-005-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}