{"product_id":"m-a-ford-11637500a-square-end-mill-3-8-inch-carbide","title":"M.a. Ford 11637500A Square End Mill 3\/8 Inch Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 11637500A is a solid carbide square end mill designed for precision material removal in demanding machining environments. Built from micrograin carbide stock, it delivers the edge retention and rigidity needed for consistent cuts in difficult materials. The TiAlN coating extends tool life under high-heat conditions common in dry or semi-dry cutting. With a 3\/8-inch cutting diameter, a 7\/8-inch length of cut, and three spiral flutes at a 30-degree helix angle, this end mill is suited for slotting, profiling, and peripheral milling operations. It is centercutting, allowing plunge entry directly into the workpiece.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in CNC machining centers and manual milling machines where a right-hand cut, right-hand flute tool is required. It handles a broad range of workpiece materials including hardened steels, cast irons, stainless steels, non-ferrous alloys, titanium alloys, and high-temperature superalloys, as indicated by primary material codes H, K, M, N, P, and S. The straight cylindrical shank and regular length classification make it compatible with standard collet and end mill holder tooling setups. This tool is typically installed by machinists and CNC programmers working in production or job-shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for superior edge retention and rigidity\u003c\/li\u003e\n  \u003cli\u003eTiAlN finish for extended tool life in high-temperature cutting conditions\u003c\/li\u003e\n  \u003cli\u003eThree spiral flutes at 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge entry into material\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute orientation for standard milling setups\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.000 \/ -0.003 inches for consistent fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-cylindrical shank collets and end mill holders with a 3\/8-inch bore. Suitable for machining workpiece material classes H, K, M, N, P, and S as classified by the manufacturer. Part of M.A. FORD Series 116.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's tooling specifications. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Seat the shank fully into the collet or holder and torque the retention hardware to the tool holder manufacturer's specification. Verify runout with a dial indicator before beginning the cut, as excessive runout will accelerate wear on a carbide tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 7\/8 inch (0.8750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 116\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: H, K, M, N, P, S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11637500A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":67906088337714,"sku":"11637500A","price":100.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0a27a58d3495c17a76b9ab406d8f3dfd_a62ef9ad-dd3a-4085-9807-12d4d3f76230.jpg?v=1791164797","url":"https:\/\/voomisupply.com\/products\/m-a-ford-11637500a-square-end-mill-3-8-inch-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}