{"product_id":"m-a-ford-11139371-corner-radius-end-mill-10mm-4-flute-carbide","title":"M.a. Ford 11139371 Corner Radius End Mill 10mm 4-flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 11139371 is a solid carbide corner radius end mill designed for precision milling in demanding production and job-shop environments. The cutter measures 10 mm in diameter with a 0.5 mm corner radius, a 25 mm length of cut, and a 70 mm overall length. Built from micrograin solid carbide, it delivers the rigidity and edge retention required when working in steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium. The bright uncoated finish makes it straightforward to inspect for wear. Licensed machinists and CNC operators install this tool in standard straight-shank toolholders for both roughing and finishing passes in a single setup.\u003c\/p\u003e\n\u003cp\u003eThis Series 111 end mill fits conventional CNC machining centers and manual mills equipped with compatible straight-cylindrical toolholders accepting a 10 mm shank. The 4-flute, right-hand spiral configuration with a medium 30-degree helix angle balances chip evacuation and surface finish across a broad range of workpiece materials. Its centercutting geometry allows plunge entry, making it suitable for slot milling, profile milling, and pocket operations where a single tool must handle both roughing stock removal and finishing passes. It is a single-end tool intended for standard-reach applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e10 mm cutting diameter with 0.5 mm corner radius for controlled edge blending and reduced corner chipping\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide construction for extended tool life in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e4-flute, right-hand spiral geometry with medium 30-degree helix for balanced chip flow and surface finish\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for a wide range of cutting fluids and coatings applied post-purchase\u003c\/li\u003e\n  \u003cli\u003eHandles both roughing and finishing material removal in steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with straight-cylindrical toolholders accepting a 10 mm shank diameter. Compatible workpiece materials include steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium as specified by the manufacturer for this series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC operator. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool. Seat the shank fully in the toolholder to the recommended gauge-line depth and torque the retention hardware per the toolholder manufacturer's specification. Verify runout at the cutting diameter before initiating a cut, as excessive runout accelerates corner wear and reduces dimensional accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 10 mm (0.3937 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.5 mm (0.0200 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 25 mm (1.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 70 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 10 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees (Medium)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Normal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.058 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 111\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11139371\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51741173907762,"sku":"11139371","price":141.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/90292fc2254e2b2326aa4bb06e77bef9_ca82863f-9f25-4201-9b9d-3141165fefcc.jpg?v=1788829823","url":"https:\/\/voomisupply.com\/products\/m-a-ford-11139371-corner-radius-end-mill-10mm-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}