{"product_id":"m-a-ford-11137501-corner-radius-end-mill-3-8-in-4-flute","title":"M.a. Ford 11137501 Corner Radius End Mill 3\/8 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 11137501 is a solid carbide corner radius end mill designed for high-performance milling across a wide range of workpiece materials. It features a 3\/8 inch diameter, a 0.015 inch corner radius (1\/64 inch), and 4 right-hand spiral flutes with a 30-degree helix angle. The bright uncoated finish suits applications where coating is not required or where post-coating is planned. At 2.5 inches overall length with a 1 inch length of cut, this single-end, centercutting tool handles both roughing and finishing operations. Machined from micrograin carbide stock, it delivers consistent edge integrity under demanding cutting conditions. Licensed machinists and CNC operators install this tool in standard toolholders for precision milling work.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for use on CNC machining centers and manual mills across a broad range of materials including steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. The Series 111 designation places it within M.A. FORD's regular-length, straight-shank lineup. The centercutting geometry allows plunge entry, making it versatile for slot milling, profile work, and pocket roughing. The 0.015 inch corner radius reduces stress concentration at the cutting edge and extends tool life in interrupted cuts and hard-material applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and edge retention in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e0.015 inch corner radius (1\/64 inch) reduces edge chipping and extends tool life in demanding cuts\u003c\/li\u003e\n  \u003cli\u003e4 right-hand spiral flutes with 30-degree helix angle for efficient chip evacuation and smooth finish\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish compatible with a wide range of cutting fluids and suitable for re-coating\u003c\/li\u003e\n  \u003cli\u003eHandles both roughing and finishing operations in a single tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-bore toolholders accepting a 3\/8 inch cylindrical shank. Suitable for steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials as noted in the M.A. FORD Series 111 specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer or spindle lock is engaged before installing or removing the end mill. Seat the shank fully into the toolholder and torque the retention hardware per the toolholder manufacturer's specifications. Verify runout after installation using a dial indicator before initiating a cutting cycle.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.015 inches (1\/64 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: +0.00120 to -0.00120 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch (0.8120 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 111\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11137501\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51727240954162,"sku":"11137501","price":112.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fe5cfeb98fc9f3e574953f6e9130bd9a.jpg?v=1788675250","url":"https:\/\/voomisupply.com\/products\/m-a-ford-11137501-corner-radius-end-mill-3-8-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}