{"product_id":"m-a-ford-11123440-square-end-mill-15-64-in-4-flute-carbide","title":"M.a. Ford. 11123440 Square End Mill 15\/64 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 11123440 is a solid carbide, 4-flute square end mill designed for precision milling operations in metalworking and machining environments. Built from micrograin solid carbide, it delivers consistent cutting performance and extended tool life compared to high-speed steel alternatives. The mill measures 15\/64 inches (0.2344 inches) in diameter with a 3\/4-inch length of cut and a 1\/4-inch straight cylindrical shank. Overall length is 2-1\/2 inches. The 30-degree helix angle and right-hand spiral flute geometry promote smooth chip evacuation and reduce chatter during operation. This tool is centercutting, allowing plunge milling when the application requires it. Machinists and CNC operators in job shops and production environments are the primary users.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling operations across a broad range of workpiece materials. The primary workpiece material codes listed include H, K, M, N, P, and S, covering hardened steels, cast iron, stainless steel, non-ferrous materials, general steels, and heat-resistant super alloys. It fits standard 1\/4-inch collets and tool holders used in vertical machining centers, knee mills, and CNC routers. The uncoated micrograin carbide substrate is appropriate for applications where a bare carbide edge is preferred or where cutting fluid is applied consistently. This is a regular-length end mill from Series 111, an uncoated single-end configuration with no chipbreaker and no variable helix or index geometry.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for extended edge life and dimensional stability\u003c\/li\u003e\n  \u003cli\u003e4-flute, right-hand cut and right-hand spiral flute for efficient chip removal\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle reduces cutting forces and chatter on a wide range of materials\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.000 \/ -0.002 inches for close-tolerance slot and profile work\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical 1\/4-inch shank fits standard ER and straight-bore collet systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard tooling selection for 1\/4-inch collet chucks and straight-bore end mill holders used in vertical machining centers, CNC routers, and manual knee mills. Compatible workpiece material codes per manufacturer specification: H, K, M, N, P, and S.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. The machine spindle must be fully stopped and the tool holder de-energized before mounting or removing the end mill. Ensure the shank is fully seated in the collet to the recommended engagement depth and that the collet nut is torqued using the tool holder manufacturer's specifications. Inspect the cutting edges for chips or damage before each use; solid carbide is hard but brittle and should not be dropped or subjected to side impact during handling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 15\/64 inches (0.2344 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inches (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inches (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 111\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11123440\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51728374628658,"sku":"11123440","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d980e3ead89e74a8ca93a37ddc1f7f95.jpg?v=1788690754","url":"https:\/\/voomisupply.com\/products\/m-a-ford-11123440-square-end-mill-15-64-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}