{"product_id":"m-a-ford-11107000a-square-end-mill-0-07in-4-flute-carbide","title":"M.a. Ford. 11107000A Square End Mill 0.07in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 11107000A is a 4-flute solid carbide square end mill designed for precision milling in demanding production environments. It features a 0.0700-inch cutting diameter, a 0.21-inch length of cut, and a 30-degree spiral helix angle that promotes efficient chip evacuation and smooth cutting action. The micrograin carbide substrate provides hardness and edge retention well beyond high-speed steel alternatives. An ALtima coating adds heat and wear resistance, extending tool life across a broad range of workpiece materials. This tool is intended for use by machinists and tool-and-die professionals working on CNC milling equipment.\u003c\/p\u003e\u003cp\u003eThis end mill is well suited for finish and semi-finish milling of small-diameter features including slots, pockets, and profiles. The right-hand cut and right-hand flute geometry are standard for conventional CNC milling setups. The straight-cylindrical shank measures 0.125 inches in diameter, fitting standard collets and tool holders sized for 1\/8-inch shanks. The overall length of 1.5 inches keeps the tool compact for close-tolerance work requiring minimal runout. Workpiece material compatibility codes include H, K, M, N, P, and S, covering hardened steels, cast iron, non-ferrous metals, non-metals, steel, and heat-resistant alloys.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0700-inch cutting diameter with a tolerance of plus 0.0005 \/ minus 0.0005 inches for consistent feature accuracy\u003c\/li\u003e\n\u003cli\u003e4-flute, 30-degree spiral helix geometry for balanced chip load and smooth surface finish\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction for superior hardness and edge retention\u003c\/li\u003e\n\u003cli\u003eALtima coating provides elevated wear and thermal resistance in demanding cuts\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable, allowing plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003eStandard-length, straight-cylindrical shank for straightforward collet and end mill holder setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with workpiece material categories H, K, M, N, P, and S as designated by the manufacturer, covering steel, cast iron, non-ferrous metals, non-metals, hardened materials, and heat-resistant superalloys. This is a Series 111 standard-length square end mill for use with 1\/8-inch collets or end mill holders on CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by qualified machinists with the spindle at a full stop and the machine in a locked-out, de-energized state per your facility lockout\/tagout procedures. Ensure the collet or tool holder bore is clean and free of chips before seating the shank. Verify runout with a dial indicator after securing the tool, as excessive runout on a 0.0700-inch diameter tool will accelerate edge wear and risk breakage. Follow the machine manufacturer and tooling manufacturer feeds-and-speeds recommendations for the specific workpiece material being cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.0700 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: plus 0.0005 \/ minus 0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: ALtima\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0085 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11107000A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51730059133234,"sku":"11107000A","price":47.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/90292fc2254e2b2326aa4bb06e77bef9_48f7fb48-6976-4f78-ac7e-bf7196c61cad.jpg?v=1788710976","url":"https:\/\/voomisupply.com\/products\/m-a-ford-11107000a-square-end-mill-0-07in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}