{"product_id":"m-a-ford-11104720-square-end-mill-0-0472-in-4-flute-carbide","title":"M.a. Ford. 11104720 Square End Mill 0.0472 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 11104720 is a solid carbide square end mill designed for precision milling in a wide range of materials. With a 0.0472 inch (1.20 mm) cutting diameter and four spiral flutes, it delivers clean, accurate cuts at small scales where rigidity and sharpness are critical. The 0.1417 inch (3.60 mm) length of cut and 1.5 inch overall length make this a compact, regular-length tool suited for shallow-to-moderate depth milling passes. A 30-degree helix angle balances chip evacuation with cutting edge strength. This end mill is used by machinists and CNC operators working in production and toolroom environments.\u003c\/p\u003e\u003cp\u003eThis end mill is designed for use on CNC machining centers and manual milling machines where tight tolerances and small-diameter cutting are required. Its centercutting geometry allows for plunge entry as well as standard peripheral and slot milling. The right-hand cut and right-hand flute configuration is standard for conventional spindle setups. Workpiece material suitability covers a broad range of material groups including hardened steels, cast irons, stainless steels, non-ferrous metals, general steels, and high-temperature alloys, corresponding to ISO material codes H, K, M, N, P, and S.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction provides superior hardness and wear resistance compared to HSS tooling\u003c\/li\u003e\n\u003cli\u003eFour flutes with 30-degree spiral helix for efficient chip flow and smooth finish\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute, compatible with standard spindle direction\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank with 3.00 mm (0.118 inch) shank diameter for standard collet holding\u003c\/li\u003e\n\u003cli\u003eUncoated carbide substrate suitable for use with cutting fluids on a broad material range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eThe 11104720 belongs to M.A. FORD. Series 111, a regular-length square end mill line rated for ISO material groups H, K, M, N, P, and S. It is compatible with any collet or end mill holder accepting a 3.00 mm straight-cylindrical shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in an e-stop or lockout state before changing tooling. Seat the shank fully into the collet or tool holder and torque the retention nut per the tool holder manufacturer specification. Verify runout with a dial indicator before beginning a production cut, as runout is critical at this diameter.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0472 inches (1.20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.1417 inches (3.60 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3.00 mm (0.118 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.040 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Material Groups (ISO)\u003c\/strong\u003e: H, K, M, N, P, S\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11104720\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51729626038578,"sku":"11104720","price":49.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3dcfc43682e6fa5a6f7048e8a3638b49.jpg?v=1788706899","url":"https:\/\/voomisupply.com\/products\/m-a-ford-11104720-square-end-mill-0-0472-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}