{"product_id":"m-a-ford-11102000-square-end-mill-1-64-in-4-flute-carbide","title":"M.a. Ford 11102000 Square End Mill 1\/64 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD 11102000 is a solid carbide square end mill designed for precision milling in tight-tolerance applications. With a cutting diameter of 0.020 inches (1\/64 inch) and a 1\/16-inch length of cut, this micro end mill is built for fine detail work in hard and exotic materials. It features a 4-flute, right-hand spiral design with a 30-degree helix angle, a straight cylindrical shank of 0.125 inches, and an overall length of 1.5 inches. The centercutting geometry allows for both plunge and side milling operations. Solid carbide construction provides rigidity and wear resistance suited to high-speed, low-vibration machining environments. Machinists and tooling professionals specify this tool when dimensional accuracy and finish quality are critical.\u003c\/p\u003e\u003cp\u003eThe 11102000 is suited for milling ferrous and non-ferrous materials including steels, cast iron, stainless steels, aluminum, copper alloys, and high-temp alloys, as indicated by workpiece material codes H, K, M, N, P, and S. The regular-length configuration and micro diameter make it particularly useful in mold-making, medical component machining, aerospace detail work, and electronics manufacturing where small-feature geometry demands consistent tool performance. It ships as a single-piece unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.020 inch (1\/64 inch) cutting diameter with plus or minus 0.0005 inch diameter tolerance\u003c\/li\u003e\n\u003cli\u003e4-flute spiral geometry with 30-degree helix angle for improved chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting design enables plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute configuration — standard orientation for CNC milling setups\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction with no coating — uncoated substrate suited for dry or lubricated micro-milling\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank at 0.125 inches for standard collet and ER chuck compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eThe 11102000 is a Series 111 micro square end mill rated for workpiece material categories H, K, M, N, P, and S, covering hardened steels, cast iron, stainless steels, aluminum alloys, copper-based materials, and superalloys. No specific machine model or system compatibility data was provided in the product record.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and setup should be performed by a qualified machinist or CNC tooling technician. At micro diameters, runout control is critical — use a precision collet or shrink-fit holder rated for the 0.125-inch shank diameter and verify runout before cutting. Secure all guards and confirm spindle speed and feed rates are appropriate for the workpiece material and tool diameter before starting the cut. At 0.020 inch diameter, tool breakage from excessive feed, misalignment, or vibration is a primary failure mode — handle with care during loading and storage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.020 inches (1\/64 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.0005 \/ minus 0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.0625 inches (1\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches (1-1\/2 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11102000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51754752704818,"sku":"11102000","price":62.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9b6f0d39b0026adad4bceba4bf281520.jpg?v=1788948416","url":"https:\/\/voomisupply.com\/products\/m-a-ford-11102000-square-end-mill-1-64-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}