{"product_id":"lochinvar-l-swr200n-shield-gas-water-heater-199999-btu-h-90-gal","title":"Lochinvar L-SWR200N Shield Gas Water Heater 199999 Btu\/h 90 Gal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe Lochinvar L-SWR200N is a commercial condensing natural gas water heater built for high-demand hot water applications. Part of the Shield series, it delivers 199,999 BTU\/h of input capacity with a 90-gallon glass-lined steel tank and a stainless steel heat exchanger. Direct spark ignition provides reliable, consistent startup without a standing pilot. With a recovery rate of 304 gallons per hour at 100 degrees F rise, this unit is engineered to keep up with the continuous draw typical in commercial and light-industrial settings. Licensed plumbing and mechanical contractors handle installation and commissioning of this class of equipment.\u003c\/p\u003e\n\u003cp\u003eThe L-SWR200N is suited for commercial installations where high recovery output and a large storage capacity are required. Typical applications include multi-unit residential buildings, hotels, restaurants, laundry facilities, and light industrial process water heating. The unit is not ASME-stamped, which is important to verify against local code requirements before specifying the unit for a jurisdiction that mandates ASME certification on commercial water heaters. It does not carry an Ultra Low NOx rating, so it may not be suitable for air-quality management districts with strict NOx emission limits.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e199,999 BTU\/h input capacity for high-demand commercial hot water loads\u003c\/li\u003e\n  \u003cli\u003e90-gallon glass-lined steel tank provides corrosion resistance and thermal storage\u003c\/li\u003e\n  \u003cli\u003eStainless steel heat exchanger for durability in condensing operation\u003c\/li\u003e\n  \u003cli\u003e304 gallons per hour recovery rate at 100 degrees F rise\u003c\/li\u003e\n  \u003cli\u003eDirect spark ignition eliminates standing pilot and reduces standby fuel use\u003c\/li\u003e\n  \u003cli\u003e3-inch direct vent connection supports flexible venting layouts\u003c\/li\u003e\n  \u003cli\u003e1-1\/2-inch water connections sized for commercial plumbing headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for commercial natural gas water heating systems requiring a non-ASME, high-recovery storage water heater with a 90-gallon tank and 199,999 BTU\/h input. Verify local code and authority having jurisdiction requirements before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation must be performed by a licensed plumber or mechanical contractor in accordance with the International Plumbing Code, local gas codes, and the manufacturer's installation instructions. Shut off the gas supply and cold water inlet before making any connections or performing service. Venting must be installed per the 3-inch direct vent specifications and applicable codes — do not mix vent materials or reduce vent diameter. Verify that the gas supply line and regulator are sized to deliver adequate flow at the rated input before startup.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Shield\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel Type\u003c\/strong\u003e: Natural Gas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput Capacity\u003c\/strong\u003e: 199,999 BTU\/h\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTank Capacity\u003c\/strong\u003e: 90 gallons\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecovery Rate\u003c\/strong\u003e: 304 gallons per hour at 100 degrees F rise\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIgnition Type\u003c\/strong\u003e: Direct Spark\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVent Size\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVent Type\u003c\/strong\u003e: Direct\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGas Connection\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater Connection\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Exchanger Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTank Lining\u003c\/strong\u003e: Glass-Lined Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eASME Certified\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltra Low NOx\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: Lochinvar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: L-SWR200N\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LOCHINVAR","offers":[{"title":"Default Title","offer_id":51524978016562,"sku":"L-SWR200N","price":18312.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/SWR125N_884efd6d-8ffc-4b64-83e9-786d355b2705.jpg?v=1785462423","url":"https:\/\/voomisupply.com\/products\/lochinvar-l-swr200n-shield-gas-water-heater-199999-btu-h-90-gal","provider":"Voomi Supply","version":"1.0","type":"link"}