{"product_id":"lionbeam-lbp42-46st-tilt-tv-wall-mount-37-70-inch-vesa-600x400","title":"Lionbeam lbp42-46st Tilt Tv Wall Mount 37-70 Inch Vesa 600x400","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LIONBEAM lbp42-46st is a fixed-position tilt TV wall mount built for flat-panel and curved screens ranging from 37 to 70 inches. Constructed from cold-rolled steel with a powder-coated matte black finish, it provides a rated weight capacity of 110 pounds while keeping a low wall profile of just 1.6 inches. The bracket arm and wall plate each use 1.5mm cold-rolled sheet steel. A built-in tilt range of 0 to -10 degrees allows the installer to angle the display downward for glare reduction or elevated mounting positions. Installation requires attachment to a solid wall or double-stud configuration at standard stud spacings of 406mm, 450mm, or 600mm. A hook-on bubble level is included to aid alignment during mounting.\u003c\/p\u003e\n\u003cp\u003eThis mount is suited for residential home theater and living room installations where a low-profile, fixed wall mount with tilt adjustment is needed. It is compatible with both flat-panel and curved TVs from 37 to 70 inches. The detachable panel design allows the screen to be hung onto the wall plate after the plate is secured to the wall, simplifying single-person installation. Licensed general contractors, AV installers, and experienced DIYers familiar with wall framing and fastener selection are the typical installers for this product type.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports screens 37 to 70 inches including curved panels\u003c\/li\u003e\n  \u003cli\u003e110-pound weight capacity, strength tested to three times rated load\u003c\/li\u003e\n  \u003cli\u003e0 to -10 degree tilt range for downward viewing angle adjustment\u003c\/li\u003e\n  \u003cli\u003e1.6-inch wall profile keeps the display close to the wall surface\u003c\/li\u003e\n  \u003cli\u003eVESA compatible up to 600x400mm including 200x200, 400x200, 300x300, and 400x400 patterns\u003c\/li\u003e\n  \u003cli\u003eDetachable panel wall plate simplifies hanging the TV after wall plate installation\u003c\/li\u003e\n  \u003cli\u003eHook-on bubble level included for accurate alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with flat-panel and curved TVs from 37 to 70 inches using VESA hole patterns of 200x200, 400x200, 300x300, 400x400, or 600x400mm. Requires installation into a solid wall or double-stud framing at stud spacings of 406mm, 450mm, or 600mm.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by someone familiar with wall framing, fastener load ratings, and stud-finding procedures. Confirm stud location and fastener pull-out capacity before mounting, as incorrect fastener selection is the primary cause of mount failure. Power down and disconnect all cables from the TV before lifting it onto the mount. Do not exceed the 110-pound rated weight capacity.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight Capacity\u003c\/strong\u003e: 110 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Screen Size\u003c\/strong\u003e: 37 to 70 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTilt Range\u003c\/strong\u003e: 0 to -10 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall Profile Depth\u003c\/strong\u003e: 1.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Dimensions\u003c\/strong\u003e: 25.7 x 16.7 x 1.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax VESA Pattern\u003c\/strong\u003e: 600x400mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupported VESA Patterns\u003c\/strong\u003e: 200x200, 400x200, 300x300, 400x400, 600x400\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel, Plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMetal Sheet Thickness\u003c\/strong\u003e: 1.5mm cold-rolled sheet (bracket arm and wall plate)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface Finish\u003c\/strong\u003e: Powder Coating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Matte Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurved TV Compatible\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall Type\u003c\/strong\u003e: Solid Wall or Double Stud at 406mm, 450mm, or 600mm spacing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel Type\u003c\/strong\u003e: Detachable Panel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBubble Level\u003c\/strong\u003e: Hook-on bubble level included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LIONBEAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: lbp42-46st\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LIONBEAM","offers":[{"title":"Default Title","offer_id":51525395087666,"sku":"LBP42-46ST","price":50.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7e6e7bff7688b1d5bac6605660f28b45.jpg?v=1785472562","url":"https:\/\/voomisupply.com\/products\/lionbeam-lbp42-46st-tilt-tv-wall-mount-37-70-inch-vesa-600x400","provider":"Voomi Supply","version":"1.0","type":"link"}