{"product_id":"lh-dottie-md6-masonry-drill-bit-1-2-inch-carbide","title":"Lh Dottie MD6 Masonry Drill Bit 1\/2 Inch Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LH DOTTIE MD6 is a tungsten carbide tipped masonry drill bit designed for percussion and rotary drilling applications. With a 1\/2 inch drill diameter and a 4 inch overall length, this bit delivers reliable penetration through hard masonry surfaces. The slow spiral, 3-flute geometry helps clear debris from the bore while maintaining cutting speed. A black oxide coated finish adds surface hardness and mild corrosion resistance. The tempered steel body is built to handle the repeated impact loads of hammer drill operation without premature wear. Licensed electricians, plumbers, and general construction tradespeople reach for this bit when anchoring in masonry substrates.\u003c\/p\u003e\n\u003cp\u003eThe MD6 is suited for drilling into brick, concrete, tile, slate, and cinder block in both residential and light commercial settings. Typical uses include setting anchor bolts, running conduit penetrations, and mounting brackets or junction boxes to masonry walls. The straight 1\/4 inch shank fits standard keyed and keyless drill chucks commonly found on corded hammer drills and rotary drills. It is sold individually in a display pouch, making it practical for single-job use or replenishment of a tool kit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTungsten carbide tipped cutting edge for durable penetration of masonry materials\u003c\/li\u003e\n  \u003cli\u003eSlow spiral 3-flute design clears masonry dust and chips during drilling\u003c\/li\u003e\n  \u003cli\u003eTempered body resists fatigue under percussion drill loads for extended service life\u003c\/li\u003e\n  \u003cli\u003eBlack oxide coated finish provides surface hardness and mild corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStraight 1\/4 inch shank fits standard drill chucks without an adapter\u003c\/li\u003e\n  \u003cli\u003eCompatible with both rotary and percussion drill modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard rotary and percussion drills equipped with a chuck that accepts a 1\/4 inch straight shank. Suitable for drilling brick, concrete, tile, slate, and cinder block.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by electricians, plumbers, or mechanical contractors drilling anchor or penetration holes in masonry. Power down or unplug the drill before changing bits. When drilling into concrete or block walls, confirm no embedded conduit, rebar, or utilities are present in the drilling path before starting. Use appropriate eye protection and dust control measures when drilling masonry, in accordance with applicable jobsite safety requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Slow Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Type\u003c\/strong\u003e: Percussion\/Rotary\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tungsten Carbide Tipped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black Oxide Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Brick, Concrete, Tile, Slate, Cinder Block\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 5.51 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 1.42 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 0.16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: Multiple\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold As\u003c\/strong\u003e: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LH DOTTIE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MD6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LH DOTTIE","offers":[{"title":"Default Title","offer_id":51284067057970,"sku":"MD6","price":17.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279378.jpg?v=1781067655","url":"https:\/\/voomisupply.com\/products\/lh-dottie-md6-masonry-drill-bit-1-2-inch-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}