{"product_id":"lenox-94615qpb257620-welded-bandsaw-blade-25-ft-2-in","title":"Lenox 94615QPB257620 Welded Bandsaw Blade 25 Ft 2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 94615QPB257620 is a welded bi-metal bandsaw blade built for continuous-loop operation on stationary bandsaws in metal-cutting applications. Measuring 25 feet in length and 2 inches wide with a 0.063-inch thickness, this blade features a variable pitch tooth pattern at 3 to 4 TPI, which helps reduce vibration and noise during cuts through a wide range of metals. The M42-plus high speed steel tooth tips are set at a positive rake angle and ground to a single-level set for consistent kerf width of 0.095 inches. The spring steel back provides flex resistance and fatigue life during extended production runs. Licensed metal fabricators, maintenance machinists, and tool room operators are the primary installers and users of this blade.\u003c\/p\u003e\n\u003cp\u003eThis blade is suited for straight and contour-free cutting of alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, other non-ferrous metals, and titanium. The variable pitch design and positive rake angle make it practical for production environments where a range of material types and section sizes pass through the same saw. It is part of the LENOX QXP series and is packaged as a single blade per unit. Typical applications include job shops, fabrication facilities, and industrial maintenance operations where a durable, high-performance bi-metal blade is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction with M42-plus high speed steel teeth for extended tooth life on hard and abrasive metals\u003c\/li\u003e\n  \u003cli\u003eVariable pitch at 3 to 4 TPI reduces vibration and chatter during cutting\u003c\/li\u003e\n  \u003cli\u003ePositive rake angle improves cut aggression and chip clearance\u003c\/li\u003e\n  \u003cli\u003eGround, single-level set teeth deliver a consistent 0.095-inch kerf width\u003c\/li\u003e\n  \u003cli\u003eSpring steel back resists flex fatigue during long production runs\u003c\/li\u003e\n  \u003cli\u003e25-foot welded loop — ready to mount with no field welding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a replacement or production-use welded bandsaw blade for stationary metal-cutting bandsaws that accept a 25-foot by 2-inch blade. Verify your saw's wheel diameter and blade tension capacity before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of bandsaw blades should be performed by a qualified operator or machinist familiar with the specific saw model. Power down and lock out the bandsaw at the main disconnect before removing the old blade or mounting the new one. Wear cut-resistant gloves when handling the coiled blade — the teeth present a laceration hazard during uncoiling and tensioning. Set blade tension and tracking per the saw manufacturer's specifications before running the blade under load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 25 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.063 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 3 to 4 (Variable Pitch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.095 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel (M42+)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Single Level Set\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Ground, Toothed, Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Tool Steel, Mold Steel, Bearing Steel, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: QXP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 94615QPB257620\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51539533300018,"sku":"94615QPB257620","price":381.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/54fd173ebc7a8a73260f10b97f2902ad_bdfc551f-5ea9-4f42-abb7-77992ae24406.jpg?v=1785842526","url":"https:\/\/voomisupply.com\/products\/lenox-94615qpb257620-welded-bandsaw-blade-25-ft-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}