{"product_id":"lenox-93618rpb113505-bi-metal-bandsaw-blade-11-5-ft","title":"Lenox 93618RPB113505 Bi-metal Bandsaw Blade 11.5 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 93618RPB113505 is a bi-metal welded bandsaw blade engineered for demanding metal-cutting applications in professional fabrication and maintenance environments. Measuring 11 feet 6 inches in length and 1-1\/4 inches wide at 0.042 inches thick, this blade is built on a spring steel back with M42 high speed steel teeth. The variable pitch tooth form runs at 5 to 8 TPI with a vari-raker tooth set, reducing vibration and extending blade life during cuts through varying material cross-sections. Licensed HVAC, plumbing, and mechanical contractors as well as metal fabricators rely on this blade for accurate, efficient cuts in production or field service settings.\u003c\/p\u003e\n\u003cp\u003eThis blade is part of the LENOX RX Plus series and is intended for use on bandsaw machines accepting an 11-foot 6-inch blade length. The variable pitch design makes it well suited for structural shapes, tubing, solids, and bundled stock where a fixed-pitch blade would chatter or load up. It is a straight-weld blade, not contour-capable, so it is appropriate for straight or mildly curved cuts on a horizontal or vertical metal-cutting bandsaw. Trade professionals in mechanical contracting, pipe fabrication, and general metalworking shops are the primary users.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction: M42 high speed steel teeth bonded to a flexible spring steel back for durability and fatigue resistance\u003c\/li\u003e\n  \u003cli\u003eVariable pitch 5 to 8 TPI with vari-raker tooth set reduces vibration and chip loading across varied stock sizes\u003c\/li\u003e\n  \u003cli\u003ePositive rake angle promotes aggressive, efficient cutting in ferrous and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003e0.068-inch kerf width delivers clean cuts with minimal material loss\u003c\/li\u003e\n  \u003cli\u003eRX Plus series designation indicates a performance-tier blade suitable for high-cycle production use\u003c\/li\u003e\n  \u003cli\u003eWelded construction provides consistent tension and straight tracking on compatible bandsaw frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for metal-cutting bandsaws that accept a blade length of 11 feet 6 inches and a blade width of 1-1\/4 inches. Confirm your saw manufacturer's specified blade length, width, and thickness tolerances before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBandsaw blade installation should be performed by qualified personnel familiar with the saw manufacturer's tensioning and blade-tracking procedures. Always power down and lock out the bandsaw before removing or installing a blade. Use appropriate cut-resistant gloves when handling the coiled blade, and verify wheel guides and thrust bearings are properly adjusted after seating the new blade. Do not exceed the blade speed ratings appropriate for the material being cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 11 feet 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.042 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 5 to 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.068 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Vari-Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Variable Pitch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: RX Plus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 93618RPB113505\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51543413621042,"sku":"93618RPB113505","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/54fd173ebc7a8a73260f10b97f2902ad_6bbb70e4-d38c-4f85-ac49-661765e206ed.jpg?v=1785918304","url":"https:\/\/voomisupply.com\/products\/lenox-93618rpb113505-bi-metal-bandsaw-blade-11-5-ft","provider":"Voomi Supply","version":"1.0","type":"link"}