{"product_id":"lenox-91228neb103315-welded-bandsaw-blade-6-tpi","title":"Lenox 91228NEB103315 Welded Bandsaw Blade 6 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 91228NEB103315 is a welded bandsaw blade designed for contour and straight cutting applications in metal fabrication, maintenance, and general trade work. The blade measures 10 feet 10.5 inches in length and 1 inch in width, with a 0.035-inch thickness and a constant 6 TPI (teeth per inch) pitch. Constructed from carbon steel with a hardened back, it delivers consistent cutting performance on a wide range of materials. The raker tooth set and straight tooth form make this blade well suited for general-purpose band sawing tasks where a steady feed rate and predictable chip clearance are priorities. Weighing 1.5 pounds, it is a direct-fit welded loop ready for installation.\u003c\/p\u003e\n\u003cp\u003eThis blade is intended for use on horizontal and vertical band saws in commercial shops, industrial maintenance environments, and trade service settings. The 6 TPI constant pitch is appropriate for cutting thicker stock where aggressive material removal is needed. The contour-cutting capability allows it to handle curved cuts as well as straight passes. Machinists, pipefitters, and metalworking tradespeople are the primary installers for blades in this size and tooth configuration.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eConstant 6 TPI pitch for aggressive cutting on thick stock\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set promotes efficient chip evacuation and reduced blade loading\u003c\/li\u003e\n  \u003cli\u003eStraight tooth form delivers clean, controlled cuts\u003c\/li\u003e\n  \u003cli\u003eHardened back type extends blade life under continuous feed pressure\u003c\/li\u003e\n  \u003cli\u003eCarbon steel blade and tooth material for general-purpose bandsaw use\u003c\/li\u003e\n  \u003cli\u003eWelded loop construction — no field splicing required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement welded bandsaw blade for band saws that accept a 10 feet 10.5-inch loop blade with a 1-inch width and 0.035-inch blade thickness.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBandsaw blade installation is typically performed by machinists or qualified maintenance technicians. Before replacing the blade, power down the saw completely and lock out the machine per OSHA lockout\/tagout procedures. Verify that the replacement blade length, width, and thickness match the saw manufacturer's specifications before tensioning. Never operate the saw with incorrect blade tension or without blade guides properly adjusted and secured.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 10 feet 10.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 91228NEB103315\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51541840920882,"sku":"91228NEB103315","price":63.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5c7016ad67bde376a7d207451a78c2a4_0fe3ad10-1f56-4fe5-a748-8e747320a9d1.jpg?v=1785886534","url":"https:\/\/voomisupply.com\/products\/lenox-91228neb103315-welded-bandsaw-blade-6-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}