{"product_id":"lenox-90931neb72360-welded-bandsaw-blade-8-tpi","title":"Lenox 90931NEB72360 Welded Bandsaw Blade 8 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 90931NEB72360 is a welded bandsaw blade designed for contour cutting applications in metal fabrication, plumbing, and mechanical trade shops. The blade measures 7 feet 9 inches in length and 3\/4 inch in width with a 0.032-inch thickness. It runs at 8 teeth per inch (TPI) with a constant pitch pattern, making it well suited for general-purpose cutting on consistent stock. The blade body and tooth material are both carbon steel with a hard back, a raker tooth set, and a straight tooth form. Licensed tradespeople and shop technicians working with bandsaws in production or service environments are the primary installers and users of this blade.\u003c\/p\u003e\n\u003cp\u003eThis blade is intended for use on bandsaw machines configured to accept a 7-foot 9-inch loop blade. The 8 TPI constant pitch and raker set pattern perform reliably on ferrous and non-ferrous materials of moderate thickness. The toothed cutting edge and straight tooth form provide predictable chip clearance during contour cuts. Typical applications include pipe fabrication shops, mechanical contractors cutting structural stock, and general metalworking operations where repeatable, clean cuts are required on a horizontal or vertical bandsaw.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWelded loop construction — 7 feet 9 inches total blade length\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch blade width with 0.032-inch thickness for stable tracking\u003c\/li\u003e\n  \u003cli\u003e8 TPI constant pitch for consistent chip load on moderate stock\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set with straight tooth form for controlled contour cutting\u003c\/li\u003e\n  \u003cli\u003eCarbon steel blade body and tooth material with hard back for rigidity\u003c\/li\u003e\n  \u003cli\u003eToothed cutting edge supports contour cutting applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-fit welded bandsaw blade for machines configured to accept a 7-foot 9-inch blade loop in 3\/4-inch width.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBandsaw blade replacement should be performed by a qualified technician following the bandsaw manufacturer's lockout and tagout procedure before opening the blade guards. Verify blade tension and tracking alignment after installation according to the machine manufacturer's specifications. Blade handling requires cut-resistant gloves due to exposed tooth edges along the full loop length. Confirm the replacement blade length and width match the machine's rated capacity before tensioning.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 7 feet 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.032 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.62 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 90931NEB72360\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51544596742450,"sku":"90931NEB72360","price":47.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5c7016ad67bde376a7d207451a78c2a4_1b4906c8-7c0e-41e3-8ca3-83a07ba0d105.jpg?v=1785930947","url":"https:\/\/voomisupply.com\/products\/lenox-90931neb72360-welded-bandsaw-blade-8-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}