{"product_id":"lenox-90425neb51640-welded-bandsaw-blade-18-tpi","title":"Lenox 90425NEB51640 Welded Bandsaw Blade 18 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 90425NEB51640 is a welded bandsaw blade designed for contour cutting applications in metalworking and fabrication environments. At 64.5 inches in length and 0.025 inches thick, this blade is built for saws requiring a compact, precision loop. It features a carbon steel body and carbon steel teeth with a straight tooth form and raker set, delivering consistent chip clearance and controlled feed rates. The constant pitch pattern at 18 teeth per inch (TPI) suits fine finish cuts on thin-walled tubing, small structural shapes, and non-ferrous stock. Licensed tradespeople and fabrication shop technicians are the primary installers and users.\u003c\/p\u003e\u003cp\u003eThis blade is suited for light-duty contour bandsaw work in production and maintenance settings. The 18 TPI constant pitch makes it well matched to thin materials where tooth-per-inch count needs to span the workpiece cross-section at all times. The raker set promotes straight, controlled cutting rather than aggressive stock removal. The hard back type adds rigidity and resistance to blade wander during the cut. It is a single-unit replacement blade packaged individually.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e64.5-inch welded loop fits compact bandsaw models requiring this blade length\u003c\/li\u003e\n\u003cli\u003e18 TPI constant pitch for fine, consistent cuts on thin cross-sections\u003c\/li\u003e\n\u003cli\u003eRaker tooth set provides balanced chip clearance and straight tracking\u003c\/li\u003e\n\u003cli\u003eStraight tooth form suited to general contour and detail cutting\u003c\/li\u003e\n\u003cli\u003eCarbon steel blade and tooth material for light-to-medium duty cutting cycles\u003c\/li\u003e\n\u003cli\u003eHard back type resists flex and blade wander under feed pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a welded replacement bandsaw blade for portable or benchtop bandsaws accepting a 64.5-inch blade loop at 0.025 inches thick. Verify wheel diameter, blade guide clearance, and tension range on the specific saw before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade replacement should be performed by a qualified technician familiar with blade tensioning and guide adjustment procedures. Disconnect power to the saw completely before removing the existing blade or installing the new one. Wear cut-resistant gloves when handling the coiled or uncoiled blade loop. After installation, confirm blade tracking, tension, and guide alignment before resuming operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 64.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Hard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 90425NEB51640\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51544677876018,"sku":"90425NEB51640","price":38.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5c7016ad67bde376a7d207451a78c2a4_2aaaad4b-06e0-4486-95ce-0d4e39c69f3c.jpg?v=1785933283","url":"https:\/\/voomisupply.com\/products\/lenox-90425neb51640-welded-bandsaw-blade-18-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}