{"product_id":"lenox-87462d2b103175-bandsaw-blade-125in-14-tpi-bi-metal","title":"Lenox 87462D2B103175 Bandsaw Blade 125in 14 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 87462D2B103175 is a welded bi-metal bandsaw blade built for continuous contour cutting in demanding shop and trade environments. At 125 inches (10 feet 5 inches) long and 0.5 inches wide with a 0.035-inch thickness, it fits a wide range of horizontal and vertical bandsaw machines. The blade runs a 14 TPI constant pitch with a straight tooth form and single level set, producing a 0.058-inch kerf. The M42 high-speed steel tooth material bonded to a spring steel back gives this Classic-series blade its resistance to heat and wear during extended cuts through hard materials.\u003c\/p\u003e\u003cp\u003eThis blade is suited for metal fabrication shops, maintenance and repair facilities, and trade contractors who cut structural materials on a bandsaw. Rated for contour cutting, it handles alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, other non-ferrous metals, and wood. The 14 TPI pitch makes it a practical choice for moderate cross-sections where a balance of cut speed and surface finish is needed. It ships as a single pre-welded loop ready to install without field welding.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBi-metal construction: M42 high-speed steel teeth bonded to a spring steel back for extended blade life\u003c\/li\u003e\n\u003cli\u003e14 TPI constant pitch with straight tooth form and single level set for consistent chip clearance\u003c\/li\u003e\n\u003cli\u003e0.058-inch kerf width minimizes material loss per cut\u003c\/li\u003e\n\u003cli\u003eContour cutting capable across a broad range of metals and wood\u003c\/li\u003e\n\u003cli\u003ePre-welded loop at 125 inches eliminates field welding and reduces setup time\u003c\/li\u003e\n\u003cli\u003eClassic series standard pitch pattern for general-purpose bandsaw applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replacement or spare welded bandsaw blade for horizontal and vertical bandsaw machines accepting a 125-inch (10 feet 5 inches) loop, 0.5-inch wide, 0.035-inch thick blade.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade replacement is typically performed by a machinist, tool-and-die technician, or qualified maintenance mechanic. Disconnect and lock out all power to the saw before removing the old blade or installing the new one. Verify blade tension, tracking adjustment, and guide bearing clearance according to the saw manufacturer specifications before returning the machine to service. Always wear cut-resistant gloves when handling coiled or looped bandsaw blades.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 125 inches (10 feet 5 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.058 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Single Level Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: No Angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Standard Constant Pitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed, Milled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Structural Steel, Tool Steel, Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.525 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 87462D2B103175\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51540288176434,"sku":"87462D2B103175","price":89.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f4febaf92672ccc9f642d235c987020e_198781d5-25c1-48ae-b828-3179612ada66.jpg?v=1785851290","url":"https:\/\/voomisupply.com\/products\/lenox-87462d2b103175-bandsaw-blade-125in-14-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}