{"product_id":"lenox-81880mab154800-welded-bandsaw-blade-24-tpi","title":"Lenox 81880MAB154800 Welded Bandsaw Blade 24 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 81880MAB154800 is a welded bi-metal bandsaw blade engineered for contour cutting across a wide range of materials in production and maintenance environments. The blade measures 15 feet 9 inches long and 0.5 inches wide, with a 0.02-inch thickness and a kerf width of 0.037 inches. The cutting edge combines a High Speed Steel M42 tooth with a spring steel back, producing a blade that resists heat and fatigue through extended cutting cycles. At 24 teeth per inch with a wavy tooth set and standard constant pitch, the blade is optimized for smooth, fine cutting on thin-wall and solid stock. Licensed HVAC, plumbing, and mechanical contractors as well as metalworking shops and fabricators rely on this blade for precision cuts on a variety of ferrous and non-ferrous materials.\u003c\/p\u003e\n\u003cp\u003eThis blade is suited for horizontal and vertical bandsaw machines in commercial shops, mechanical rooms, and fabrication facilities. Its 24 TPI constant pitch makes it well-matched for cutting thin sections of alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals, as well as wood. The wavy tooth set reduces blade vibration and minimizes burr on finished cuts. Trades that regularly cut conduit, pipe, bar stock, and structural shapes will find this blade appropriate for both production runs and service work where a pre-welded loop blade is preferred over a coil-stock option.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction: M42 High Speed Steel teeth bonded to a spring steel back for heat resistance and flexibility\u003c\/li\u003e\n  \u003cli\u003e24 TPI wavy tooth set with straight tooth form for fine, smooth cuts on thin and solid stock\u003c\/li\u003e\n  \u003cli\u003ePre-welded loop eliminates field joining and provides consistent tension across the full blade length\u003c\/li\u003e\n  \u003cli\u003e0.037-inch kerf width minimizes material loss per cut\u003c\/li\u003e\n  \u003cli\u003eContour cutting capable for curved and irregular profiles\u003c\/li\u003e\n  \u003cli\u003eCompatible with a broad material range including stainless steel, aluminum, carbon steel, tool steel, and wood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for bandsaw machines that accept a 15-foot 9-inch blade loop with a 0.5-inch blade width. Verify wheel diameter, blade guide clearance, and tension ratings on the host saw before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBandsaw blade replacement should be performed by a qualified technician familiar with the host machine. Disconnect and lock out power to the bandsaw before removing the old blade or installing the new one. Verify blade tension and guide bearing alignment per the saw manufacturer specifications before running the machine. Wear cut-resistant gloves when handling the blade loop, as the teeth are sharp across the full length.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 15 feet 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.02 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 24\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Standard Constant Pitch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Wavy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: No Angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.037 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed and Milled\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Structural Steel, Tool Steel, Wood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Classic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.48 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 81880MAB154800\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51540438647090,"sku":"81880MAB154800","price":115.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f4febaf92672ccc9f642d235c987020e_bb82889b-9baf-4b79-847a-4ad0bb2ddaea.jpg?v=1785855169","url":"https:\/\/voomisupply.com\/products\/lenox-81880mab154800-welded-bandsaw-blade-24-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}