{"product_id":"lenox-73688clb103175-bandsaw-blade-125in-14-tpi-bi-metal","title":"Lenox 73688CLB103175 Bandsaw Blade 125in 14 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 73688CLB103175 is a welded bi-metal bandsaw blade designed for continuous cutting operations on metal-cutting vertical and horizontal band saws. Measuring 125 inches in length and 3\/4 inch wide with a 0.035-inch blade thickness, it runs a 14 TPI constant-pitch tooth pattern suited for cutting a broad range of metals. The blade body is spring steel with an M42 high speed steel tooth edge, a combination that delivers heat resistance and edge retention under sustained use. A wavy tooth set and 0.058-inch kerf width help clear chips efficiently and reduce blade deflection. This blade is installed by HVAC sheet metal fabricators, pipefitters, plumbers, and general metalworking trades that rely on band saws for structural and alloy stock cutting.\u003c\/p\u003e\n\u003cp\u003eThis blade is appropriate for vertical or horizontal band saw applications in shop and field fabrication environments. It is rated for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The 14 TPI pitch is well matched to medium-wall and solid stock where a fine-to-medium chip load balances cut speed with surface finish. It is sold individually and fits band saws that accept a 125-inch blade loop.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction: M42 high speed steel teeth bonded to a flexible spring steel back for durability and resistance to blade fatigue\u003c\/li\u003e\n  \u003cli\u003e14 TPI constant pitch with wavy tooth set for efficient chip clearance and reduced vibration\u003c\/li\u003e\n  \u003cli\u003eStraight tooth form with no rake angle for controlled, consistent cuts in varied metal stock\u003c\/li\u003e\n  \u003cli\u003e0.058-inch kerf width minimizes material loss per cut\u003c\/li\u003e\n  \u003cli\u003eRated for alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eLENOX Classic series — welded loop, ready to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit welded replacement blade for band saws that accept a 125-inch (10 feet 5 inches) blade loop with a 3\/4-inch width and 0.035-inch blade thickness.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBand saw blade installation and tensioning should be performed by a qualified technician following the band saw manufacturer's guidelines. Disconnect and lock out power to the saw before opening the blade guards or removing the existing blade. Confirm wheel alignment and blade guides are properly set before resuming operation. Do not exceed the maximum blade speed rating of the host machine for the material being cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 125 inches (10 feet 5 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.058 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal — Spring Steel Back\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: M42 High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Wavy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: No Angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Standard Constant Pitch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Classic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Structural Steel, Tool Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.7875 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 73688CLB103175\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51540454146354,"sku":"73688CLB103175","price":97.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/599e20776736986b01b7ffd4a5083314_b4ddbca4-df86-4c23-924c-e5fae287cdd2.jpg?v=1785855684","url":"https:\/\/voomisupply.com\/products\/lenox-73688clb103175-bandsaw-blade-125in-14-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}