{"product_id":"lenox-71891d2b113380-welded-bandsaw-blade-14-tpi","title":"Lenox 71891D2B113380 Welded Bandsaw Blade 14 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 71891D2B113380 is a welded bi-metal bandsaw blade built for continuous contour cutting across a wide range of metals and materials. Measuring 11 feet 1 inch in length and 0.5 inches wide, this blade runs at 14 teeth per inch with a constant standard pitch and a straight tooth form. The tooth material is M42 High Speed Steel, a cobalt-bearing grade selected for heat resistance and edge retention during demanding cuts. The spring steel back provides flexibility and fatigue resistance through repeated cycles. Blade thickness is 0.035 inches with a kerf width of 0.058 inches. This blade is sold as a single unit and is intended for installation on stationary vertical or horizontal bandsaw machines.\u003c\/p\u003e\n\u003cp\u003eSuited for professional metalworking, fabrication, and maintenance environments, this blade handles alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. The 14 TPI constant pitch and single level tooth set make it well matched to cutting solid bar, tubing, and structural sections in the mid-size range. The LENOX Classic series is a common choice for job shop environments where a reliable general-purpose bi-metal blade is needed across varied stock types and production volumes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction with M42 High Speed Steel teeth for extended cutting life in ferrous and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eSpring steel back for flexibility and resistance to blade fatigue\u003c\/li\u003e\n  \u003cli\u003e14 TPI constant standard pitch for consistent chip load across varied material cross-sections\u003c\/li\u003e\n  \u003cli\u003eStraight tooth form with single level set and no rake angle for controlled, accurate cuts\u003c\/li\u003e\n  \u003cli\u003eKerf width of 0.058 inches minimizes material loss per cut\u003c\/li\u003e\n  \u003cli\u003eContour cutting capable for curved or irregular workpiece profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a welded replacement bandsaw blade for stationary bandsaw machines accepting a blade length of 11 feet 1 inch and a blade width of 0.5 inches. Verify wheel diameter, guide clearance, and tension capacity against the machine specifications before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or maintenance technician with the bandsaw powered off and locked out per OSHA lockout\/tagout procedures. Confirm blade length, width, and thickness match the machine manufacturer specifications before mounting. Wear cut-resistant gloves when handling the coiled blade during installation. Set blade tension and guide clearances according to the machine manufacturer guidelines before operating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 11 feet 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.058 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: M42 High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Single Level Set\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: No Angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Classic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Structural Steel, Tool Steel, Wood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5775 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 71891D2B113380\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51541293629746,"sku":"71891D2B113380","price":97.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f4febaf92672ccc9f642d235c987020e_a6ccb125-eba0-4e04-99c6-3a568444f587.jpg?v=1785871565","url":"https:\/\/voomisupply.com\/products\/lenox-71891d2b113380-welded-bandsaw-blade-14-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}