{"product_id":"lenox-5328flc12127-band-saw-blade-coil-0-5-in-100-ft","title":"Lenox 5328FLC12127 Band Saw Blade Coil 0.5 in 100 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 5328FLC12127 is a carbon steel band saw blade coil stock designed for continuous-length cutting applications in metal fabrication, HVAC ductwork, plumbing rough-in, and general trade work. The coil measures 100 feet in length with a blade width of 0.5 inches and a blade thickness of 0.025 inches. With 4 teeth per inch in a constant-pitch, hook-tooth, raker-set configuration and a flexible back construction, this coil stock is suited for contour cutting and straight cuts through a range of materials. Tradespeople cut blades to length on-site for welding or use in standard band saw equipment.\u003c\/p\u003e\n\u003cp\u003eThis coil stock is used in shops and field settings where custom blade lengths are required. The 100-foot coil allows a single roll to yield multiple blades, reducing downtime from blade changeovers. The hook tooth form and raker set deliver consistent chip clearance on ferrous and non-ferrous stock. Typical users include pipefitters, sheet metal workers, and maintenance technicians who run band saws regularly and prefer sourcing bulk blade material over pre-cut blades.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon steel construction for durability across general-purpose band saw cutting\u003c\/li\u003e\n  \u003cli\u003e4 teeth per inch constant-pitch pattern for consistent cut performance\u003c\/li\u003e\n  \u003cli\u003eHook tooth form promotes aggressive chip evacuation on each pass\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set reduces blade drift and vibration during cuts\u003c\/li\u003e\n  \u003cli\u003eFlexible back design reduces blade fatigue and breakage on contour cuts\u003c\/li\u003e\n  \u003cli\u003e100-foot coil yields multiple custom-length blades from a single roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a bulk coil replacement for standard band saw equipment accepting 0.5-inch-wide blades with a 0.025-inch blade thickness; suitable for use wherever carbon steel band saw blade coil stock of this width and gauge is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade cutting and welding should be performed by qualified personnel familiar with band saw equipment and blade-welding procedures. Disconnect and lock out power to the band saw before installing or changing blades. Wear cut-resistant gloves when handling coil stock, as uncoiled blade material can spring and cause laceration injuries. Verify that the blade tension, guide settings, and wheel alignment on the saw match the blade width and thickness specifications before operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoil Length\u003c\/strong\u003e: 100 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Hook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 20 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5328FLC12127\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51538381570354,"sku":"5328FLC12127","price":173.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5210f1eb3c1d6f99f297af80b47221d0.jpg?v=1785823890","url":"https:\/\/voomisupply.com\/products\/lenox-5328flc12127-band-saw-blade-coil-0-5-in-100-ft","provider":"Voomi Supply","version":"1.0","type":"link"}