{"product_id":"lenox-4029nec3895-band-saw-blade-coil-10-tpi-3-8-in-100-ft","title":"Lenox 4029NEC3895 Band Saw Blade Coil 10 Tpi 3\/8 in 100 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 4029NEC3895 is a carbon steel band saw blade coil stock designed for continuous cutting applications where shop-cut blade lengths are required. The coil measures 100 feet and yields multiple custom-length blades to fit a range of band saw frames. At 3\/8 inch wide and 0.025 inch thick, this blade is sized for general-purpose contour and straight cutting. The hard back construction resists flex fatigue during extended cuts, and the raker tooth set with a constant 10 teeth per inch pitch delivers consistent chip removal in wood, non-ferrous metal, and plastic stock. Fabricators and maintenance technicians cut lengths to spec and weld or braze ends on-site.\u003c\/p\u003e\u003cp\u003eThis coil stock is suited for production shops, maintenance facilities, and service operations that run multiple band saws and prefer to stock bulk blade material rather than pre-cut blades. The 3\/8 inch width handles contour cuts with moderate radius curves while remaining stiff enough for ripping straight lines. The constant 10 TPI pitch is well matched to medium-density materials and uniform cross-sections where a consistent feed rate is maintained throughout the cut.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCarbon steel construction provides good wear resistance for general-purpose cutting applications\u003c\/li\u003e\n\u003cli\u003eHard back design reduces blade fatigue and maintains straightness under continuous load\u003c\/li\u003e\n\u003cli\u003eRaker tooth set clears chips efficiently from the kerf during each stroke\u003c\/li\u003e\n\u003cli\u003eConstant 10 TPI pitch delivers predictable, smooth cuts in uniform material cross-sections\u003c\/li\u003e\n\u003cli\u003eStraight tooth form suits ripping and crosscutting in wood, plastics, and soft non-ferrous stock\u003c\/li\u003e\n\u003cli\u003e100-foot coil length supports shop-cut custom sizing for multiple saw frames\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as bulk coil stock for band saws that accept 3\/8 inch wide blades; end users cut and join to the required loop length for their specific saw frame.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutting and welding band saw blade coil stock should be performed by a qualified technician using a blade welder and appropriate personal protective equipment including cut-resistant gloves and eye protection. Verify the finished blade tension, tracking, and guard settings before operating the saw, following the saw manufacturer guidelines and applicable ANSI safety standards. Never operate a band saw with a blade that has visible cracks, missing teeth, or improper weld joints.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Length\u003c\/strong\u003e: 100 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Hard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4029NEC3895\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51542720545074,"sku":"4029NEC3895","price":181.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f20a0bc63e81848ff7093b8f2c491e91_5a1e60ba-697b-4ccb-a080-76be4595616a.jpg?v=1785905307","url":"https:\/\/voomisupply.com\/products\/lenox-4029nec3895-band-saw-blade-coil-10-tpi-3-8-in-100-ft","provider":"Voomi Supply","version":"1.0","type":"link"}